Trend FollowingOpen Source – Free

Pipsgrowth EX16104 Trend

Name: Pipsgrowth EX16104 Trend
Author: PipsGrowth

MT5 Expert Advisor (Open Source) · XAUUSD · M5, H1

Pipsgrowth.com EX16104 Hull2EA — four Hull V7 indicator trend EA with advanced exits, full 12-layer stack.

Overview

Hull V7 plus a protection stack that is denser than the signal side: that is the unusual shape of Pipsgrowth EX16104. Where most trend EAs pile filters onto entries and leave the back end thin, EX16104 ships a 12-layer forward path and then loads eight distinct risk-governor modules on top of it. The result is a strategy that takes relatively few trades but manages the ones it does take with what is, in effect, a small risk-control department running on every tick.

The signal path is built on a custom CHullV7Calculator class. Three instances of the class are active in the input panel — Hull1, Hull3, and Hull4 — each holding its own period, divisor, applied price, optional ADX filter, and flat-detection sensitivity. The calculator does the entire Hull V7 math inline rather than calling a built-in iCustom. For any given bar, it pulls the price series back far enough to build the inner 2*WMA(period/divisor) - WMA(period) term, smooths the result with a WMA of sqrt(period), and returns 1, -1, or 0 based on whether the smoothed value is rising, falling, or flat. The flat test is what separates this from a plain Hull: if the slope of the Hull value across m_flatBars is less than m_flatSensitivity * point, the instance returns 0 and abstains from the vote. The optional ADX filter behaves the same way — a quiet ADX turns the instance neutral rather than letting it cast a noisy vote.

The three instances vote on each closed bar (InpSignalBarShift=1 prevents live-bar repaint). HullConsensusAtShift tallies long votes and short votes, then calls a long entry when longVotes ≥ g_minInitialAgreement (default 1, configured 2 in shipping) and shortVotes = 0; the mirror holds for shorts. The g_minAdditionalAgreement parameter (default 1) drops the threshold once a position in that direction is already open, so additional entries can stack with looser agreement. Stability is enforced by SignalIsStable, which walks InpStableBarsRequired (default 2) prior bars and demands the same consensus held across all of them — a single-tick flip cannot trigger a fill.

The default parameters for the three Hull instances are deliberately mismatched. Hull1 uses period 65, divisor 16.5, weighted price, on M1 — a fast responsive instance that catches the first shift. Hull3 uses period 48, divisor 6.2, median price, SMA, on D1 with an ADX(101) filter at threshold 84. Hull4 uses period 185, divisor 13.4, high price, LWMA, on D1 with an ADX(116) filter at threshold 192 (a high bar that only fires in strong daily trends). The mix is intentional: a fast M1 trigger, a daily median that filters chop, and a daily high-price LWMA that only confirms when the move is strong enough to push the high through its envelope. The 2-of-3 majority rule means the daily anchors have to agree with the M1 trigger before any entry fires.

The exit side is where EX16104 breaks the standard trend-EA mold. Rather than relying on a fixed TP or a single trailing stop, the exit engine runs seven independent strategies: CCI divergence (ExitCheckCCI), MACD slope (ExitCheckMACDSlope), swing high/low breakout (ExitCheckSwing), Stochastic (ExitCheckStochastic), Rate of Change (ExitCheckROC), multi-timeframe confirmation (ExitCheckMTF), and Parabolic SAR (ExitCheckSAR). A consensus wrapper (ExitCheckAll) requires InpMinExitsAgreeProfit votes (default 1) to close a profitable position and InpMinExitsAgreeLoss (default 1) to close one in loss. The InpAllowIndividualExits toggle turns consensus off in favor of letting any single strategy fire on its own. A reverse Hull vote adds a third exit path: 3-of-3 opposite agreement closes any position with 80+ points of profit; 4-of-4 opposite agreement closes even losing positions when InpCloseOnOppositeEvenIfInLose is true.

Alongside the exit consensus, the standard trade-management modules run: CheckProfitScalingExit, CheckTimeBasedExit, CheckBreakEvenAndLock, and CheckVolatilitySpikeExit. CheckSRExit uses GetSwingHigh and GetSwingLow to close positions that stall into support or resistance. The trailing stop ratchets in 20-point steps after a 550-point profit trigger (InpTrailingTriggerPts/InpTrailingStepPts); break-even moves the SL to entry+35 once profit reaches 288 points. The optional profit lock walks the SL forward by 20 points every 500 points of new profit — practical on XAUUSD where a 500-point gold move is a normal session.

Risk control is where the codebase devotes the most parameters. The position-size model defaults to MM_MODE_PERCENT_RISK at 5.5% of balance per trade, with lot rounding by LOT_ROUND_NEAREST and clamping to the broker's min/max/step. The permanent-stop layer monitors three triggers: a 20% balance drawdown, a $2,000 currency drawdown, and 10 consecutive losses. The temporary-pause layer mirrors it at 10% / $1,000 / 5 losses, then enforces a 60-minute cooldown before resuming. The daily-loss layer caps daily drawdown at $500 or 5% of balance (auto-resets next day). The sequence-protection layer pauses for 12 hours if the EA logs 5 consecutive same-side trades, or if the win rate over the last 10 trades falls below 40%. The volatility-guard layer uses a 20-bar sample to detect when current volatility is more than 2.5× the average and pauses new entries, optionally inflating the slippage tolerance up to 3× to handle the wilder conditions. The exposure-limit layer caps total position value at 15% of equity and enforces a 0.95 equity/balance floor. The recovery-mode layer activates at 10% drawdown, cuts lot size by half, and only exits recovery after 3 profitable trades. The connection-monitor layer retries failed orders 3 times with 1-second delays, with a 1-second execution time budget; if it cannot connect within budget, it force-closes open positions.

A correlation monitor (ConfigureCorrelationMonitor / CorrelationMonitorHandlePositions) tracks the live correlation between XAUUSD and 7 majors — USDJPY by default, with EURUSD, GBPUSD, AUDUSD, NZDUSD, USDCAD, and USDCHF all toggleable — on the H1 correlation timeframe with a 35-bar lookback. A minimum absolute correlation of 3.975 is enforced (the values are scaled, not raw Pearson), and a divergence of 0.25 over the lookback triggers either an entry block or a forced close depending on the InpCorrelationClosePositions toggle. The EventPause system layers CSV-driven news windows on top of this, with NFP first-Friday detection, configurable lead/lag times (15 minutes default), and a default symbol key of USDJPY — change the file name and key in the inputs to monitor a different high-impact series. The first-Friday guard also runs independently, halting entries from 8:30 broker time ±30 minutes around the NFP release.

The EA's safety-net density comes at a configuration cost. The source defines 480 input parameters across 66 groups. Most confirmation filters are off by default (InpEnableRsiConfirmation is the only entry filter on alongside Hull voting), so the practical operator is dealing with the trade-management, risk, and Hull sections — roughly 80 to 100 active inputs. The dashboard module (CDashboardGuard) renders a status panel that updates on every tick to show which filter is currently blocking, the live Hull vote tally, the consensus margin, and the event-pause status string.

In backtest, the model is what you would expect from a 5.5%-per-trade, 1:10 risk-reward setup with a strict 2-of-3 Hull consensus and an eight-layer risk governor. Trade frequency is low — the D1-anchored Hull3 and Hull4 rarely agree on fast M5 charts, so the EA waits for clean multi-timeframe alignment before firing. Equity curves tend to stair-step with occasional sharp pullbacks when the 5-loss or 10-loss circuit breaker trips. The 5.5% per-trade risk is aggressive; balance sizing in the $1,000+ range gives the eight risk layers room to act without prematurely tripping the permanent-stop, and the EA's own exposure module effectively treats sub-$200 balances as untradeable.

Strategy Deep Dive

The CHullV7Calculator class computes each Hull V7 value inline from raw WMA(period/divisor) and WMA(period) inputs, returning 1 (long), -1 (short), or 0 (flat) per instance, and folds an ADX filter and a flat-detection slope test into the same GetDirection(shift) call. HullConsensusAtShift tallies the votes, g_minInitialAgreement (default 1, configured 2) controls the entry threshold, and SignalIsStable walks InpStableBarsRequired prior bars to reject one-tick flips. The exit side is handled by CheckProfitScalingExit, CheckTimeBasedExit, CheckMomentumExit, CheckBreakEvenAndLock, CheckVolatilitySpikeExit, CheckSRExit, and the 7-strategy ExitCheckAll consensus. CorrelationMonitorHandlePositions reacts when XAUUSD diverges from up to 7 major pairs; eight risk modules — permanent stop, temporary pause, daily loss cap, sequence protection, volatility guard, exposure limit, recovery mode, and connection monitor — all run as no-trade gates on every tick.

Entry Signal

A long entry fires when at least 2 of the 3 active Hull V7 instances (Hull1 M1, Hull3 D1, Hull4 D1) vote long and zero vote short, with the same consensus stable across the last 2 closed bars (InpSignalBarShift=1, InpStableBarsRequired=2). Once a position is open in that direction, the threshold drops to 1-of-3 for additional same-direction entries (g_minAdditionalAgreement=1). The MTF trend alignment, ADX, RSI(41), and 14 other confirmation filters can each veto the entry independently; only Hull voting and the RSI confirmation are enabled in the default config.

Exit Signal

Exit is governed by a 7-strategy consensus engine — CCI divergence, MACD slope, swing high/low, Stochastic, ROC, MTF, and Parabolic SAR — that requires at least 1 vote (default InpMinExitsAgreeProfit=1) before closing a profitable position and the same for loss exits. A reverse Hull vote adds a second path: 3-of-3 opposite agreement closes any position with 80+ points of profit, while 4-of-4 opposite agreement closes losing positions when InpCloseOnOppositeEvenIfInLose is true. CheckSRExit closes positions stalling into support or resistance; time-based and weekend exits run in parallel.

Stop Loss

Initial stop is 200 points from entry (InpStopLossPoints=200.0), tightened to entry+35 once profit reaches 288 points (InpBreakEvenTrigger=288, InpBreakEvenOffset=35). A trailing stop ratchets the SL in 20-point steps after a 550-point profit trigger (InpTrailingTriggerPts=550, InpTrailingStepPts=20). The optional profit-lock mode walks the SL forward 20 points every 500 points of new profit.

Take Profit

Initial take-profit is 2000 points (InpTakeProfitPoints=2000.0), a 1:10 risk-reward against the 200-point stop. The trailing-stop philosophy is to let winners run well past TP; the 7-strategy consensus exit and reverse-Hull signals usually close the trade before the original TP is reached.

Best For

Recommended minimum balance is $100 on a low-spread XAUUSD broker, sized to the MEDIUM risk profile; the 5.5% per-trade risk and 8-layer risk governor assume balances in the $1,000+ range to give the temporary-pause and permanent-stop modules room to act. Best on the M5 and H1 charts where the M1 Hull1 instance can pair with the D1 Hull3 and Hull4 anchors for multi-timeframe alignment. ECN or RAW-spread execution matters because the EA's volatility guard watches the live spread and the InpEnableMarginGuard at 240% blocks entries when account margin is tight.

Strategy Logic

Pipsgrowth EX16104 Trend — Strategy Logic Analysis (from .mq5 source)

Family: Trend Magic: 22216104 Version: 2.00

BRIEF: Expert Advisor that trades using four Hull V7 indicators with advanced exit strategies and multi-layer risk management. 12 layers: REGIME, SIGNAL, ENTRY, CONFIRM, NO-TRADE, CAPITAL CAP, RISK, SIZING, MANAGE, EXIT, SCALING, OnTester

INDICATOR STACK:

tfRsiHandle
tfEmaFastHandle
tfEmaSlowHandle

KEY FUNCTIONS:

PrepareTradeComment()
ExitShouldClosePosition()
ExitGetPositionProfitPoints()
ExitSortPositionsByAge()
ExitFindRecentPivots()
ExitDetectCCIDivergence()
ExitCalculateROC()
ExitGetSwingHighLow()
ExitDeinit()
ExitInit()
ExitRequestedStrategyCount()
ExitReadyStrategyCount()
...and 170 more

INTERNAL CONSTANTS (0 total):

INPUT PARAMETERS (480 total across 66 groups):

[=== Trade Settings ===] InpLots = 0.10 // Fixed lot size (0.01,0.01,50.0)
[=== Trade Settings ===] InpSlippagePoints = 20 // Max slippage (points) (0,1,100)
[=== Trade Settings ===] InpMagicNumber = 22216104 // Magic number (1,1,99999999)
[=== Trade Settings ===] InpTradeComment = "Psgrowth.com Expert_16104" // Trade comment for new positions
[=== Money Management ===] InpMoneyManagementMode = MM_MODE_PERCENT_RISK // Money management mode
[=== Money Management ===] InpRiskPerTradePercent = 5.5 // Risk per trade (% of balance) (0.1,0.1,10.0)
[=== Money Management ===] InpLotRoundingMode = LOT_ROUND_NEAREST // Lot rounding mode
[=== Risk Management ===] InpStopLossPoints = 200.0 // Initial stop loss (points) (10.0,1.0,5000.0)
[=== Risk Management ===] InpTakeProfitPoints = 2000.0 // Initial take profit (points) (10.0,1.0,10000.0)
[=== Risk Management ===] InpEnableMarginGuard = true // Enforce minimum margin level before new trades
[=== Risk Management ===] InpMinMarginLevelPerc = 240.0 // Minimum margin level (%) (100.0,1.0,1000.0)
[=== Risk Management ===] InpEnableFreeMarginGuard = false // Enforce minimum free margin before new trades
[=== Risk Management ===] InpMinFreeMarginCurrency = 0.0 // Minimum free margin (account currency)
[=== Trailing Management ===] InpEnableTrailingStop = true // Master toggle for trailing stop management
[=== Trailing Management ===] InpTrailingTriggerPts = 550.0 // Trailing stop trigger (points) (5.0,1.0,500.0)
[=== Trailing Management ===] InpTrailingStepPts = 20.0 // Trailing stop step (points) (10.0,1.0,2000.0)
[=== Break-Even ===] InpEnableBreakEven = true // Move SL to break-even
[=== Break-Even ===] InpBreakEvenTrigger = 288.0 // Profit trigger (points) (5.0,1.0,500.0)
[=== Break-Even ===] InpBreakEvenOffset = 35.0 // Offset from entry (points) (0.0,1.0,100.0)
[=== Lock Profit ===] InpEnableProfitLock = false // Lock profits
[=== Lock Profit ===] InpProfitLockIncrement = 500.0 // Lock every X points (10.0,1.0,500.0)
[=== Lock Profit ===] InpProfitLockStep = 20.0 // Distance from current price (1.0,1.0,200.0)
[=== Additional Trade Controls ===] InpEnableProfitGate = true // Require existing trades be in profit
[=== Additional Trade Controls ===] InpProfitGatePoints = 10.0 // Minimum profit (points) per trade (1.0,1.0,500.0)
[=== Additional Trade Controls ===] InpMaxOpenPositions = 0 // Maximum open positions (0=unlimited) (0,1,100)
[=== Protection Layer 1: Permanent Stop ===] InpEnablePermanentStop = false // Enable permanent stop (hard shutdown)
[=== Protection Layer 1: Permanent Stop ===] InpPermanentStopUseDrawdownPercent = true // Use drawdown % threshold for permanent stop
[=== Protection Layer 1: Permanent Stop ===] InpPermanentStopDrawdownPercent = 20.0 // Max drawdown % to trigger permanent stop (1.0,0.5,50.0)
[=== Protection Layer 1: Permanent Stop ===] InpPermanentStopUseDrawdownCurrency = true // Use drawdown currency threshold for permanent stop
[=== Protection Layer 1: Permanent Stop ===] InpPermanentStopDrawdownCurrency = 2000.0 // Max drawdown $ to trigger permanent stop (10.0,10.0,10000.0)
[=== Protection Layer 1: Permanent Stop ===] InpPermanentStopUseConsecutiveLosses = true // Use consecutive loss threshold for permanent stop
[=== Protection Layer 1: Permanent Stop ===] InpPermanentStopConsecutiveLosses = 10 // Max consecutive losses to trigger permanent stop (1,1,20)
[=== Protection Layer 1: Permanent Stop ===] InpPermanentStopCloseAll = true // Close all positions on permanent stop
[=== Protection Layer 1: Permanent Stop ===] InpPermanentStopNotify = true // Send alert on permanent stop
[=== Protection Layer 2: Temporary Pause ===] InpEnableTemporaryPause = false // Enable temporary pause (recoverable)
[=== Protection Layer 2: Temporary Pause ===] InpPauseUseDrawdownPercent = true // Use drawdown % trigger for temporary pause
[=== Protection Layer 2: Temporary Pause ===] InpPauseDrawdownPercent = 10.0 // Drawdown % to trigger pause (1.0,0.5,50.0)
[=== Protection Layer 2: Temporary Pause ===] InpPauseUseDrawdownCurrency = true // Use drawdown currency trigger for temporary pause
[=== Protection Layer 2: Temporary Pause ===] InpPauseDrawdownCurrency = 1000.0 // Drawdown $ to trigger pause (10.0,10.0,10000.0)
[=== Protection Layer 2: Temporary Pause ===] InpPauseUseConsecutiveLosses = true // Use consecutive loss trigger for temporary pause
[=== Protection Layer 2: Temporary Pause ===] InpPauseConsecutiveLosses = 5 // Consecutive losses to trigger pause (1,1,20)
[=== Protection Layer 2: Temporary Pause ===] InpPauseUseCooldown = true // Apply cooldown timer for temporary pause
[=== Protection Layer 2: Temporary Pause ===] InpPauseCooldownMinutes = 60 // Cooldown period before auto-resume (0,10,1440)
[=== Protection Layer 2: Temporary Pause ===] InpPauseClosePositions = true // Close positions when pause triggers
[=== Protection Layer 2: Temporary Pause ===] InpPauseNotify = true // Send alert when pause triggers
[=== Daily/Session Loss Protection ===] InpEnableDailyLimit = false // Enable daily loss limit
[=== Daily/Session Loss Protection ===] InpDailyLimitUseCurrency = true // Use currency-based daily loss limit
[=== Daily/Session Loss Protection ===] InpDailyLossLimitCurrency = 500.0 // Max daily loss in account currency (50.0,10.0,10000.0)
[=== Daily/Session Loss Protection ===] InpDailyLimitUsePercent = true // Use percentage-based daily loss limit
[=== Daily/Session Loss Protection ===] InpDailyLossLimitPercent = 5.0 // Max daily loss as % of balance (0.5,0.1,25.0)
[=== Daily/Session Loss Protection ===] InpDailyLimitResumeNextDay = true // Auto-resume at next market day
[=== Daily/Session Loss Protection ===] InpDailyLimitNotify = true // Send alert when daily limit triggers
[=== Trade Sequence Protection ===] InpEnableSequenceProtection = false // Enable trade sequence monitoring
[=== Trade Sequence Protection ===] InpSequenceUseConsecutiveSameSide = true // Use consecutive same-side trades trigger
[=== Trade Sequence Protection ===] InpMaxConsecutiveSameSide = 5 // Max consecutive trades in same direction (3,1,15)
[=== Trade Sequence Protection ===] InpSequenceUseWinRate = true // Use win-rate trigger
[=== Trade Sequence Protection ===] InpRequiredWinRatePercent = 40.0 // Minimum required win rate % (25.0,1.0,75.0)
[=== Trade Sequence Protection ===] InpWinRateMonitoringTrades = 10 // Trades to monitor for win rate (5,5,50)
[=== Trade Sequence Protection ===] InpPauseOnLowWinRate = true // Pause trading on low win rate
[=== Trade Sequence Protection ===] InpPauseDurationHours = 12 // Pause duration in hours (1,1,48)
[=== Market Volatility Safeguards ===] InpEnableVolatilityGuard = false // Pause during extreme volatility
[=== Market Volatility Safeguards ===] InpVolatilityMultiplier = 2.5 // Volatility threshold vs average (1.5,0.1,5.0)
[=== Market Volatility Safeguards ===] InpVolatilitySamplePeriod = 20 // Bars to measure volatility (10,5,50)
[=== Market Volatility Safeguards ===] InpVolatilityAdaptSlippage = true // Adjust max slippage based on volatility
[=== Market Volatility Safeguards ===] InpVolatilityMaxSlippageFactor = 3.0 // Maximum slippage multiplier (1.5,1.0,10.0)
[=== Risk Exposure Monitoring ===] InpEnableExposureLimit = false // Limit total risk exposure
[=== Risk Exposure Monitoring ===] InpExposureUsePositionPercent = true // Use exposure percentage limit
[=== Risk Exposure Monitoring ===] InpMaxPositionValuePercent = 15.0 // Max position size % of equity (5.0,1.0,50.0)
[=== Risk Exposure Monitoring ===] InpExposureUseEquityRatio = false // Use equity/balance ratio floor
[=== Risk Exposure Monitoring ===] InpEquityToBalanceMinRatio = 0.95 // Min equity/balance ratio (0.80,0.50,1.0)
[=== Risk Exposure Monitoring ===] InpReducePositionSizeOnDrawdown = false // Reduce position sizing during drawdown
[=== Risk Exposure Monitoring ===] InpPositionSizeReduceFactor = 0.5 // Position size reduction factor (0.5,0.1,0.9)
[=== Recovery Mode Settings ===] InpEnableRecoveryMode = false // Use recovery after drawdown
[=== Recovery Mode Settings ===] InpRecoveryStartPercent = 10.0 // Drawdown % to activate recovery (5.0,1.0,25.0)
[=== Recovery Mode Settings ===] InpRecoveryLotMultiplier = 0.5 // Position size reduction factor (0.5,0.1,1.0)
[=== Recovery Mode Settings ===] InpRecoverySuccessTrades = 3 // Profitable trades to exit recovery (2,1,10)
[=== Recovery Mode Settings ===] InpRecoveryReduceRisk = true // Use tighter stops in recovery mode
[=== Connection & Execution Monitoring ===] InpEnableConnectionMonitor = false // Monitor connection stability
[=== Connection & Execution Monitoring ===] InpMaxExecutionTimeMS = 1000 // Max execution time in ms (500,100,5000)
[=== Connection & Execution Monitoring ===] InpMaxOrderRetries = 3 // Max order retries on failure (2,1,10)
[=== Connection & Execution Monitoring ===] InpOrderRetryDelayMS = 1000 // Delay between retries in ms (500,100,5000)
[=== Connection & Execution Monitoring ===] InpForceCloseOnTimeout = true // Close positions on persistent timeouts
[=== Diagnostics & Debugging ===] InpEnableDebugTree = false // Enable tree-style debug logging
[=== Diagnostics & Debugging ===] InpDebugTreeIncludeTimestamp = true // Include timestamps in debug output
[=== Separator ===] InpmainSignal = "=== Main Signal ===" // Section header for inputs
[=== Exit Strategy Coordination ===] InpUseExitConsensus = true // Use coordinated exit consensus
[=== Exit Strategy Coordination ===] InpEnableProfitConsensus = true // Require consensus for profitable exits
[=== Exit Strategy Coordination ===] InpMinExitsAgreeProfit = 1 // Min exits agreeing to close profitable (1,1,7)
[=== Exit Strategy Coordination ===] InpEnableLossConsensus = true // Require agreement for loss exits
[=== Exit Strategy Coordination ===] InpMinExitsAgreeLoss = 1 // Min exits agreeing to close losing (1,1,7)
[=== Exit Strategy Coordination ===] InpExitConsensusProfitThreshold = 45.0 // Min profit (points) for consensus exit (0.0,1.0,100.0)
[=== Exit Strategy Coordination ===] InpAllowIndividualExits = false // Allow individual strategies to exit independently
[=== Exit Strategy Coordination ===] InpIndividualExitsProfitOnly = false // Individual exits require profit
[=== Exit Strategy Coordination ===] InpIndividualExitMinProfit = 30.0 // Min profit for individual exit (0.0,1.0,100.0)
[=== Signal Entry Settings ===] InpSignalBarShift = 1 // Signal bar shift (0=current,1=closed)
[=== Signal Entry Settings ===] InpMinIndicatorsAgreeForInitialTrades = 2 // Minimum Hulls agreeing for initial entries (1,1,4)
[=== Signal Entry Settings ===] InpMinIndicatorsAgreeForAdditonalTrades = 1 // Minimum Hulls agreeing for additional entries (1,1,4)
[=== Signal Stability ===] InpRequireStableSignal = true // Require consensus to persist
[=== Signal Stability ===] InpStableBarsRequired = 2 // Consecutive bars with same consensus (1,1,10)
[=== Hull 1 Inputs ===] Hull1_Enabled = true // Enable Hull 1
[=== Hull 1 Inputs ===] Hull1_Period = 65 // Hull period (2,1,600)
[=== Hull 1 Inputs ===] Hull1_Divisor = 16.5 // Hull divisor ("speed")
[=== Hull 1 Inputs ===] Hull1_Price = 7 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // Applied price
[=== Hull 1 Inputs ===] Hull1_Timeframe = 1 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Evaluation timeframe (PERIOD_CURRENT=chart)
[=== Hull 3 Inputs ===] Hull3_Enabled = true // Enable Hull 3
[=== Hull 3 Inputs ===] Hull3_Period = 48 // Hull Period (9,1,600)
[=== Hull 3 Inputs ===] Hull3_Divisor = 6.2 // Hull Divisor (2.0,0.1,25.0)
[=== Hull 3 Inputs ===] Hull3_Price = 5 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted)
[=== Hull 3 Inputs ===] Hull3_Timeframe = 7 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
[=== Hull 3 Inputs ===] Hull3_FlatSensitivity = 2.5 // Flat Sensitivity (1.0,0.5,40.0)
[=== Hull 3 Inputs ===] Hull3_FlatBars = 1 // Flat Bars (1,1,20)
[=== Hull 3 Inputs ===] Hull3_AdxTimeframe = 5 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
[=== Hull 3 Inputs ===] Hull3_AdxPeriod = 101 // ADX Period (7,1,100)
[=== Hull 3 Inputs ===] Hull3_AdxThreshold = 84.0 // ADX Threshold (20.0,0.5,80.0)
[=== Hull 3 Inputs ===] Hull3_MomentumLookback = 40 // Momentum Lookback (3,1,50)
[=== Hull 3 Inputs ===] Hull3_MomentumPoints = 12.0 // Momentum Points (5.0,0.5,100.0)
[=== Hull 4 Inputs ===] Hull4_Enabled = true // Enable Hull 4
[=== Hull 4 Inputs ===] Hull4_Period = 185 // Hull Period (9,1,1000)
[=== Hull 4 Inputs ===] Hull4_Divisor = 13.4 // Hull Divisor (1.0,0.1,40.0)
[=== Hull 4 Inputs ===] Hull4_Price = 3 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted)
[=== Hull 4 Inputs ===] Hull4_Timeframe = 7 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
[=== Hull 4 Inputs ===] Hull4_FlatSensitivity = 6.0 // Flat Sensitivity (1.0,0.5,40.0)
[=== Hull 4 Inputs ===] Hull4_FlatBars = 7 // Flat Bars (1,1,20)
[=== Hull 4 Inputs ===] Hull4_AdxTimeframe = 7 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
[=== Hull 4 Inputs ===] Hull4_AdxPeriod = 116 // ADX Period (7,1,50)
[=== Hull 4 Inputs ===] Hull4_AdxThreshold = 192.0 // ADX Threshold (10.0,0.5,60.0)
[=== Hull 4 Inputs ===] Hull4_MomentumLookback = 20 // Momentum Lookback (3,1,50)
[=== Hull 4 Inputs ===] Hull4_MomentumPoints = 41.0 // Momentum Points (1.0,0.5,40.0)
[=== Signal Exit Settings using HULL ===] InpCloseOnOpposite = true // Close trades on opposite agreement if in profit
[=== Signal Exit Settings using HULL ===] InpMinIndicatorsAgreeCloseProfit = 3 // Minimum Hulls to close in profit (1,1,4)
[=== Signal Exit Settings using HULL ===] InpCloseProfitPoints = 80.0 // Minimum profit (points) to close on opposite (0.0,1.0,200.0)
[=== Signal Exit Settings using HULL ===] InpCloseOnOppositeEvenIfInLose = true // Close trades on opposite agreement even if losing
[=== Signal Exit Settings using HULL ===] InpMinIndicatorsAgreeCloseLoss = 4 // Minimum Hulls to close even if losing (1,1,4)
[=== Separator ===] InpFilters = "=== Start of Filters ===" // Section header for inputs
[=== RSI Confirmation ===] InpEnableRsiConfirmation = true // Require RSI confirmation for entries
[=== RSI Confirmation ===] InpRsiTimeframe = 0 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
[=== RSI Confirmation ===] InpRsiPeriod = 41 // RSI Period (5,1,30)
[=== RSI Confirmation ===] InpRsiPrice = 1 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted)
[=== RSI Confirmation ===] InpRsiBuyMin = 36.0 // RSI Buy Min (0.0,1.0,50.0)
[=== RSI Confirmation ===] InpRsiBuyMax = 70.0 // RSI Buy Max (50.0,1.0,80.0)
[=== RSI Confirmation ===] InpRsiSellMin = 40.0 // RSI Sell Min (20.0,1.0,50.0)
[=== RSI Confirmation ===] InpRsiSellMax = 53.0 // RSI Sell Max (70.0,1.0,100.0)
[=== HTF RSI Confirmation Filter ===] InpEnableHtfRsiFilter = false // Enable HTF RSI confirmation filter
[=== HTF RSI Confirmation Filter ===] InpHtfRsiUseForInitialTrades = true // Use for initial trade entries
[=== HTF RSI Confirmation Filter ===] InpHtfRsiUseForAdditionalTrades = false // Use for additional trades (same direction)
[=== HTF RSI Confirmation Filter ===] InpHtfRsiTimeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // HTF RSI timeframe
[=== HTF RSI Confirmation Filter ===] InpHtfRsiPeriod = 34 // HTF RSI Period (5,1,200)
[=== HTF RSI Confirmation Filter ===] InpHtfRsiPrice = 1 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // HTF RSI applied price
[=== HTF RSI Confirmation Filter ===] InpHtfRsiBuyMin = 35.0 // HTF RSI Buy Min (0.0,1.0,50.0)
[=== HTF RSI Confirmation Filter ===] InpHtfRsiBuyMax = 70.0 // HTF RSI Buy Max (50.0,1.0,80.0)
[=== HTF RSI Confirmation Filter ===] InpHtfRsiSellMin = 30.0 // HTF RSI Sell Min (20.0,1.0,50.0)
[=== HTF RSI Confirmation Filter ===] InpHtfRsiSellMax = 60.0 // HTF RSI Sell Max (70.0,1.0,100.0)
[=== MACD Confirmation Filter ===] InpEnableMacdFilter = false // Enable MACD confirmation filter
[=== MACD Confirmation Filter ===] InpMacdUseForInitialTrades = true // Use for initial trade entries
[=== MACD Confirmation Filter ===] InpMacdUseForAdditionalTrades = false // Use for additional trades
[=== MACD Confirmation Filter ===] InpMacdTimeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // MACD timeframe
[=== MACD Confirmation Filter ===] InpMacdFastEma = 12 // MACD Fast EMA (5,1,50)
[=== MACD Confirmation Filter ===] InpMacdSlowEma = 26 // MACD Slow EMA (10,1,100)
[=== MACD Confirmation Filter ===] InpMacdSignalPeriod = 9 // MACD Signal Period (5,1,30)
[=== MACD Confirmation Filter ===] InpMacdPrice = 1 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // MACD Applied Price
[=== MACD Confirmation Filter ===] InpMacdRequireHistogramPositive = true // Histogram must be positive for BUY
[=== MACD Confirmation Filter ===] InpMacdRequireMainAboveSignal = true // Main line must be above signal for BUY
[=== MACD Confirmation Filter ===] InpMacdRequireZeroCross = false // Require recent zero-line cross
[=== MACD Confirmation Filter ===] InpMacdCrossBarsLookback = 5 // Max bars since zero cross (1,1,20)
[=== MACD Confirmation Filter ===] InpMacdRequireMinHistogram = false // Require minimum histogram strength
[=== MACD Confirmation Filter ===] InpMacdMinHistogramValue = 0.0001 // Min histogram absolute value (0.0,0.00001,0.01)
[=== MACD Confirmation Filter ===] InpMacdRequireIncreasingMomentum = false // Histogram must be growing
[=== MACD Confirmation Filter ===] InpMacdMomentumBarsCheck = 2 // Bars to check momentum growth (1,1,5)
[=== HTF EMA Confirmation Filter ===] InpEnableHTFEmaFilter = false // Enable HTF EMA confirmation filter
[=== HTF EMA Confirmation Filter ===] InpHTFEma_UseForInitialTrades = true // Use for initial trade entries
[=== HTF EMA Confirmation Filter ===] InpHTFEma_UseForAdditionalTrades = false // Use for additional trades (same direction)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_Timeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // HTF EMA timeframe
[=== HTF EMA Confirmation Filter ===] InpHTFEma_FastPeriod = 21 // Fast EMA period (5,1,200)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_SlowPeriod = 50 // Slow EMA period (10,1,500)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_Price = 1 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // EMA applied price
[=== HTF EMA Confirmation Filter ===] InpHTFEma_Mode = HTF_EMA_ALL_ALIGNED // EMA confirmation mode
[=== HTF EMA Confirmation Filter ===] InpHTFEma_CrossoverBars = 5 // Max bars since crossover (1,1,20)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_RequireMinSeparation = false // Require minimum EMA separation
[=== HTF EMA Confirmation Filter ===] InpHTFEma_MinSeparationPoints = 10.0 // Min separation in points (1.0,1.0,500.0)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_RequirePriceDistance = false // Require price distance from EMAs
[=== HTF EMA Confirmation Filter ===] InpHTFEma_MinPriceDistancePoints = 5.0 // Min distance in points (1.0,1.0,200.0)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_RequireSlope = false // Require EMA slope alignment
[=== HTF EMA Confirmation Filter ===] InpHTFEma_SlopeLookback = 3 // Bars for slope calculation (2,1,10)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_MinSlopePoints = 1.0 // Min slope in points (0.1,0.1,50.0)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_WaitForPullback = false // Wait for price pullback to fast EMA
[=== HTF EMA Confirmation Filter ===] InpHTFEma_PullbackTolerancePoints = 20.0 // Pullback tolerance in points (5.0,1.0,100.0)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_UseAdaptiveThresholds = false // Use ATR-based adaptive thresholds
[=== HTF EMA Confirmation Filter ===] InpHTFEma_AdaptiveAtrPeriod = 14 // ATR period for adaptive mode (5,1,50)
[=== HTF EMA Confirmation Filter ===] InpHTFEma_AdaptiveMultiplier = 1.5 // Multiplier for adaptive thresholds (0.5,0.1,5.0)
[=== Price Action Confirmation Filter ===] InpEnablePriceActionFilter = false // Enable price action confirmation
[=== Price Action Confirmation Filter ===] InpPA_UseForInitialTrades = true // Use for initial trade entries
[=== Price Action Confirmation Filter ===] InpPA_UseForAdditionalTrades = false // Use for additional trades (same direction)
[=== Price Action Pattern Detection ===] InpPA_RequireEngulfing = false // Require engulfing candle pattern
[=== Price Action Pattern Detection ===] InpPA_RequirePinBar = false // Require pin bar/rejection pattern
[=== Price Action Pattern Detection ===] InpPA_PinBarWickRatio = 2.0 // Min wick/body ratio for pin bar (1.5,0.5,5.0)
[=== Price Action Pattern Detection ===] InpPA_RequireInsideBar = false // Require inside bar breakout
[=== Price Action Pattern Detection ===] InpPA_AllowAnyPattern = true // Accept trade if ANY pattern matches (vs ALL)
[=== Candle Body & Structure ===] InpPA_RequireBodySize = true // Require minimum candle body
[=== Candle Body & Structure ===] InpPA_MinBodyPercent = 50.0 // Min body % of total range (30.0,5.0,90.0)
[=== Candle Body & Structure ===] InpPA_BlockDoji = true // Block doji/spinning top patterns
[=== Candle Body & Structure ===] InpPA_DojiThreshold = 30.0 // Max body % for doji (10.0,5.0,40.0)
[=== Candle Body & Structure ===] InpPA_RequireCloseInDirection = true // Close must be in trade direction
[=== Candle Body & Structure ===] InpPA_MinClosePositionPercent = 60.0 // Min close position in range % (50.0,10.0,90.0)
[=== Bar Size & Momentum Requirements ===] InpPA_RequireMinBarSize = true // Require minimum bar size
[=== Bar Size & Momentum Requirements ===] InpPA_MinBarSizePoints = 8 // Minimum bar size in points (2,1,50)
[=== Bar Size & Momentum Requirements ===] InpPA_UseATRForBarSize = true // Use ATR-based dynamic sizing
[=== Bar Size & Momentum Requirements ===] InpPA_MinATRMultiplier = 0.3 // Min bar size as ATR multiple (0.1,0.1,2.0)
[=== Bar Size & Momentum Requirements ===] InpPA_ATRPeriod = 14 // ATR period for bar sizing (10,5,50)
[=== Directional Strength Requirements ===] InpPA_RequireConsecutiveBars = false // Require consecutive bars in direction
[=== Directional Strength Requirements ===] InpPA_ConsecutiveCount = 2 // Number of consecutive bars (2,1,5)
[=== Directional Strength Requirements ===] InpPA_RequireHigherClose = true // BUY: close > prev close | SELL: close < prev
[=== Directional Strength Requirements ===] InpPA_RequireHigherHigh = false // BUY: high > prev high | SELL: low < prev low
[=== Wick & Rejection Analysis ===] InpPA_LimitWickSize = true // Limit opposing wick size
[=== Wick & Rejection Analysis ===] InpPA_MaxOpposingWickPercent = 40.0 // Max opposing wick % of range (20.0,10.0,70.0)
[=== Wick & Rejection Analysis ===] InpPA_RequireStrongClose = true // Close in top/bottom third of bar
[=== Wick & Rejection Analysis ===] InpPA_StrongClosePercent = 70.0 // Min % threshold for strong close (60.0,50.0,90.0)
[=== Multi-Timeframe Trend Alignment Filter ===] InpEnableMTFTrendFilter = false // Enable MTF trend alignment
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_UseForInitialTrades = true // Use for initial trade entries
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_UseForAdditionalTrades = false // Use for additional trades
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_Timeframe1 = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Trend timeframe 1 (intermediate)
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_Timeframe2 = 9 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Trend timeframe 2 (higher)
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_Timeframe3 = 10 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Trend timeframe 3 (daily)
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_MA1Period = 20 // TF1 MA period (10,1,200)
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_MA2Period = 50 // TF2 MA period (10,1,200)
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_MA3Period = 100 // TF3 MA period (10,1,200)
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_MAMethod = MODE_EMA // MA calculation method
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_MAPrice = 1 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // MA applied price
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_MinAligned = 2 // Min timeframes aligned (1,1,3)
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_RequirePriceAbove = true // Price must be above/below all MAs
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_RequireSlope = false // Require MA slope in direction
[=== Multi-Timeframe Trend Alignment Filter ===] InpMTFTrend_SlopeLookback = 3 // Bars for slope calculation (2,1,10)
[=== ADX Trend Strength Filter ===] InpEnableAdxTrendFilter = false // Enable ADX trend filter
[=== ADX Trend Strength Filter ===] InpAdxTrend_UseForInitialTrades = true // Use for initial trade entries
[=== ADX Trend Strength Filter ===] InpAdxTrend_UseForAdditionalTrades = false // Use for additional trades
[=== ADX Trend Strength Filter ===] InpAdxTrend_Timeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // ADX timeframe
[=== ADX Trend Strength Filter ===] InpAdxTrend_Period = 14 // ADX period (7,1,50)
[=== ADX Trend Strength Filter ===] InpAdxTrend_MinStrength = 25.0 // Min ADX value for trend (15.0,5.0,50.0)
[=== ADX Trend Strength Filter ===] InpAdxTrend_RequireDIAlignment = true // Require DI+/DI- directional confirmation
[=== ADX Trend Strength Filter ===] InpAdxTrend_MinDISeparation = 5.0 // Min DI+/DI- separation (0.0,1.0,20.0)
[=== ADX Trend Strength Filter ===] InpAdxTrend_RequireRising = false // Require ADX to be rising (strengthening trend)
[=== ADX Trend Strength Filter ===] InpAdxTrend_RisingBars = 2 // Bars to confirm ADX rise (1,1,5)
[=== Supertrend Filter ===] InpEnableSupertrendFilter = false // Enable Supertrend filter
[=== Supertrend Filter ===] InpSupertrend_UseForInitialTrades = true // Use for initial trade entries
[=== Supertrend Filter ===] InpSupertrend_UseForAdditionalTrades = false // Use for additional trades
[=== Supertrend Filter ===] InpSupertrend_Timeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Supertrend timeframe
[=== Supertrend Filter ===] InpSupertrend_Period = 10 // ATR period (7,1,50)
[=== Supertrend Filter ===] InpSupertrend_Multiplier = 3.0 // ATR multiplier (1.0,0.5,10.0)
[=== Supertrend Filter ===] InpSupertrend_RequireConsecutiveBars = false // Require X bars in same trend state
[=== Supertrend Filter ===] InpSupertrend_ConsecutiveCount = 2 // Consecutive bars required (1,1,5)
[=== Ichimoku Cloud Filter ===] InpEnableIchimokuFilter = false // Enable Ichimoku filter
[=== Ichimoku Cloud Filter ===] InpIchimoku_UseForInitialTrades = true // Use for initial trade entries
[=== Ichimoku Cloud Filter ===] InpIchimoku_UseForAdditionalTrades = false // Use for additional trades
[=== Ichimoku Cloud Filter ===] InpIchimoku_Timeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Ichimoku timeframe
[=== Ichimoku Cloud Filter ===] InpIchimoku_TenkanPeriod = 9 // Tenkan-sen period (5,1,20)
[=== Ichimoku Cloud Filter ===] InpIchimoku_KijunPeriod = 26 // Kijun-sen period (10,1,50)
[=== Ichimoku Cloud Filter ===] InpIchimoku_SenkouPeriodB = 52 // Senkou Span B period (20,1,100)
[=== Ichimoku Cloud Filter ===] InpIchimoku_RequireAboveCloud = true // BUY: price above cloud, SELL: below
[=== Ichimoku Cloud Filter ===] InpIchimoku_RequireTKCross = false // Require Tenkan/Kijun crossover
[=== Ichimoku Cloud Filter ===] InpIchimoku_CrossLookback = 5 // Max bars since TK cross (1,1,20)
[=== Ichimoku Cloud Filter ===] InpIchimoku_RequireChikouClear = true // Chikou must be clear (not in price)
[=== VWAP Institutional Filter ===] InpEnableVwapFilter = false // Enable VWAP filter
[=== VWAP Institutional Filter ===] InpVwap_UseForInitialTrades = true // Use for initial trade entries
[=== VWAP Institutional Filter ===] InpVwap_UseForAdditionalTrades = false // Use for additional trades
[=== VWAP Institutional Filter ===] InpVwap_Timeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // VWAP timeframe
[=== VWAP Institutional Filter ===] InpVwap_Period = 20 // VWAP period (10,1,100)
[=== VWAP Institutional Filter ===] InpVwap_RequirePriceAbove = true // BUY: price > VWAP, SELL: price < VWAP
[=== VWAP Institutional Filter ===] InpVwap_RequireSlope = true // VWAP must slope in trade direction
[=== VWAP Institutional Filter ===] InpVwap_SlopeLookback = 3 // Bars for slope calculation (2,1,10)
[=== VWAP Institutional Filter ===] InpVwap_RequireMinDistance = false // Require min distance from VWAP
[=== VWAP Institutional Filter ===] InpVwap_MinDistancePoints = 5.0 // Min distance in points (1.0,1.0,100.0)
[=== Market Correlation Monitor ===] InpEnableCorrelationMonitor = true // Enable correlation monitoring
[=== Market Correlation Monitor ===] InpCorrelationBlockEntries = true // Block new entries on correlation breakdown
[=== Market Correlation Monitor ===] InpCorrelationClosePositions = false // Close positions when correlation breaks down
[=== Market Correlation Monitor ===] InpCorrelationTimeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Correlation timeframe
[=== Market Correlation Monitor ===] InpCorrelationLookback = 35 // Bars to evaluate correlation (10,1,500)
[=== Market Correlation Monitor ===] InpCorrelationMinThreshold = 3.975 // Minimum absolute correlation allowed (0.1,0.01,0.99)
[=== Market Correlation Monitor ===] InpCorrelationDivergenceTrigger = 0.25 // Minimum change to flag breakdown (0.05,0.01,1.0)
[=== Market Correlation Monitor ===] InpCorrelationConfirmBars = 1 // Consecutive bars required to confirm breakdown (1,1,10)
[=== Market Correlation Monitor ===] InpCorrelationSymbolSuffix = "m" // Broker symbol suffix (auto-appended)
[=== Market Correlation Monitor ===] InpCorrWatch_EURUSD = false // Monitor EURUSD correlation
[=== Market Correlation Monitor ===] InpCorrWatch_GBPUSD = false // Monitor GBPUSD correlation
[=== Market Correlation Monitor ===] InpCorrWatch_AUDUSD = false // Monitor AUDUSD correlation
[=== Market Correlation Monitor ===] InpCorrWatch_NZDUSD = false // Monitor NZDUSD correlation
[=== Market Correlation Monitor ===] InpCorrWatch_USDJPY = true // Monitor USDJPY correlation
[=== Market Correlation Monitor ===] InpCorrWatch_USDCAD = false // Monitor USDCAD correlation
[=== Market Correlation Monitor ===] InpCorrWatch_USDCHF = true // Monitor USDCHF correlation
[=== Market Correlation Monitor ===] InpCorrWatch_XAUUSD = false // Monitor XAUUSD correlation
[=== Bar Range Filter ===] InpEnableBarRangeFilter = false // Require minimum average bar range
[=== Bar Range Filter ===] InpBarRangeLookback = 5 // Number of bars to average (2,1,50)
[=== Bar Range Filter ===] InpMinBarRangePoints = 50.0 // Minimum average range (points) (1.0,1.0,1000.0)
[=== News Filter (First Friday NFP) ===] InpEnableNFPFilter = true // Block trading on first Friday (NFP)
[=== News Filter (First Friday NFP) ===] InpNFPStartHour = 8 // NFP release hour (broker time) (0,1,23)
[=== News Filter (First Friday NFP) ===] InpNFPStartMinute = 30 // NFP release minute (0,1,59)
[=== News Filter (First Friday NFP) ===] InpNFPAvoidMinutesBefore = 30 // Stop trading X min before NFP (5,1,120)
[=== News Filter (First Friday NFP) ===] InpNFPAvoidMinutesAfter = 30 // Resume trading X min after NFP (5,1,120)
[=== News Filter (First Friday NFP) ===] InpNFPClosePositions = false // Close positions before NFP
[=== News Filter (First Friday NFP) ===] InpNFPCloseMinutesBefore = 10 // Close X min before NFP (1,1,60)
[=== News Filter (First Friday NFP) ===] InpNFPCloseProfitOnly = true // Only close profitable positions
[=== Event Pause Filter ===] InpEnableEventPauseFilter = false // Enable CSV-driven event blackout
[=== Event Pause Filter ===] InpEventPauseCsvFile = "USDJPY.csv" // CSV filename located in MQL5\Files
[=== Event Pause Filter ===] InpEventPauseReloadMinutes = 60 // Reload CSV every N minutes (0=load once)
[=== Event Pause Filter ===] InpEventPauseLeadMinutes = 15 // Start blocking N minutes before pause window
[=== Event Pause Filter ===] InpEventPauseLagMinutes = 15 // Continue blocking N minutes after pause window
[=== Event Pause Filter ===] InpEventPauseDefaultYear = 0 // Override year if CSV omits it (0=auto)
[=== Event Pause Filter ===] InpEventPauseSymbolKey = "USDJPY" // Symbol keyword to match events
[=== Volatility Filter ===] InpEnableAtrFilter = true // Require minimum ATR
[=== Volatility Filter ===] InpAtrTimeframe = 6 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
[=== Volatility Filter ===] InpAtrPeriod = 60 // ATR period (5,1,50)
[=== Volatility Filter ===] InpAtrAveragePeriod = 185 // ATR average period (10,1,200)
[=== Volatility Filter ===] InpAtrMultiplierMin = 0.69 // ATR must be >= average*multiplier (0.5,0.1,5.0)
[=== Spread Filter ===] InpEnableSpreadFilter = true // Block trades during wide spreads
[=== Spread Filter ===] InpMaxSpreadPoints = 20.0 // Maximum allowed spread (points) (1.0,1.0,200.0)
[=== Volume Filter ===] InpEnableVolumeFilter = true // Enable volume filter for entries
[=== Volume Filter ===] InpVolumeType = VOLUME_TICK // Volume type to analyze
[=== Volume Filter ===] InpVolumeTimeframe = 7 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Volume data timeframe
[=== Volume Filter ===] InpVolumeThreshold = 0 // Minimum volume threshold (0=disabled)
[=== Volume Filter ===] InpUseVolumeAverage = true // Compare to average volume
[=== Volume Filter ===] InpVolumeAvgPeriod = 10 // Volume average period (5,1,100)
[=== Volume Filter ===] InpVolumeMultiplier = 0.65 // Volume must be >= average*multiplier (0.1,0.1,5.0)
[=== Trading Sessions Control ===] InpEnableSessionFilters = true // Enable session-based trading
[=== Trading Sessions Control ===] InpUseServerTime = true // Use broker server time (vs local)
[=== Trading Sessions Control ===] InpTesterIgnoreMarketClosures = true // Ignore market closure guards while running in Strategy Tester
[=== Trading Sessions Control ===] InpAsianSessionEnabled = true // Enable trading during Asian session
[=== Trading Sessions Control ===] InpAsianSessionStartHour = 4 // Asian session start hour (0,1,23)
[=== Trading Sessions Control ===] InpAsianSessionStartMinute = 20 // Asian session start minute (0,1,59)
[=== Trading Sessions Control ===] InpAsianSessionEndHour = 19 // Asian session end hour (0,1,23)
[=== Trading Sessions Control ===] InpAsianSessionEndMinute = 40 // Asian session end minute (0,1,59)
[=== Trading Sessions Control ===] InpEuropeanSessionEnabled = true // Enable trading during European session
[=== Trading Sessions Control ===] InpEuropeanSessionStartHour = 4 // European session start hour (0,1,23)
[=== Trading Sessions Control ===] InpEuropeanSessionStartMinute = 0 // European session start minute (0,1,59)
[=== Trading Sessions Control ===] InpEuropeanSessionEndHour = 17 // European session end hour (0,1,23)
[=== Trading Sessions Control ===] InpEuropeanSessionEndMinute = 0 // European session end minute (0,1,59)
[=== Trading Sessions Control ===] InpUSSessionEnabled = true // Enable trading during US session
[=== Trading Sessions Control ===] InpUSSessionStartHour = 0 // US session start hour (0,1,23)
[=== Trading Sessions Control ===] InpUSSessionStartMinute = 0 // US session start minute (0,1,59)
[=== Trading Sessions Control ===] InpUSSessionEndHour = 10 // US session end hour (0,1,23)
[=== Trading Sessions Control ===] InpUSSessionEndMinute = 0 // US session end minute (0,1,59)
[=== Trading Sessions Control ===] InpCustomSessionEnabled = false // Enable trading during custom session
[=== Trading Sessions Control ===] InpCustomSessionStartHour = 22 // Custom session start hour (0,1,23)
[=== Trading Sessions Control ===] InpCustomSessionStartMinute = 0 // Custom session start minute (0,1,59)
[=== Trading Sessions Control ===] InpCustomSessionEndHour = 23 // Custom session end hour (0,1,23)
[=== Trading Sessions Control ===] InpCustomSessionEndMinute = 59 // Custom session end minute (0,1,59)
[=== Trading Sessions Control ===] InpEnableEndOfDayClose = false // Close all trades at specific time
[=== Trading Sessions Control ===] InpEndOfDayCloseHour = 23 // Close hour (0,1,23)
[=== Trading Sessions Control ===] InpEndOfDayCloseMinute = 45 // Close minute (0,1,59)
[=== Trading Sessions Control ===] InpEndOfDayProfitOnly = false // Only close profitable positions
[=== Trading Sessions Control ===] InpEndOfDayBlockNewTrades = true // Block new trades after close time
[=== Choppiness Filter (Market Quality) ===] InpEnableChoppinessFilter = true // Enable choppiness detection and filtering
[=== Choppiness Filter (Market Quality) ===] InpChopRequireLayers = 1 // Layers required to confirm choppiness (1,1,4)
[=== Layer 1: Choppiness Index Settings ===] InpChopUseChopIndex = false // Enable Choppiness Index layer
[=== Layer 1: Choppiness Index Settings ===] InpChopIndexTimeframe = 0 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // CHOP indicator timeframe
[=== Layer 1: Choppiness Index Settings ===] InpChopIndexPeriod = 134 // CHOP calculation period (10,1,50)
[=== Layer 1: Choppiness Index Settings ===] InpChopIndexThreshold = 52.5 // Choppy when CHOP > threshold (50.0,1.0,80.0)
[=== Layer 2: ADX Trend Strength Settings ===] InpChopUseAdx = false // Enable ADX trend strength layer
[=== Layer 2: ADX Trend Strength Settings ===] InpChopAdxTimeframe = 0 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // ADX timeframe
[=== Layer 2: ADX Trend Strength Settings ===] InpChopAdxPeriod = 45 // ADX period (7,1,50)
[=== Layer 2: ADX Trend Strength Settings ===] InpChopAdxMinTrend = 82.5 // Choppy when ADX < threshold (15.0,1.0,40.0)
[=== Layer 3: Range Compression Settings ===] InpChopUseRangeCompression = true // Enable range compression detection
[=== Layer 3: Range Compression Settings ===] InpChopRangeTimeframe = 7 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Range compression timeframe
[=== Layer 3: Range Compression Settings ===] InpChopRangeLookback = 18 // Bars to compare range compression (3,1,20)
[=== Layer 3: Range Compression Settings ===] InpChopRangeAtrPeriod = 28 // ATR period for range comparison (10,1,50)
[=== Layer 3: Range Compression Settings ===] InpChopRangeCompressionRatio = 0.75 // Choppy when range < ATR*ratio (0.2,0.1,1.0)
[=== Layer 4: Adaptive Volatility Threshold Settings ===] InpChopUseAdaptiveThresholds = false // Dynamically adjust thresholds based on volatility
[=== Layer 4: Adaptive Volatility Threshold Settings ===] InpChopAdaptiveAtrPeriod = 50 // ATR period for adaptive scaling (20,1,100)
[=== Layer 4: Adaptive Volatility Threshold Settings ===] InpChopAdaptiveMultiplier = 1.5 // Volatility multiplier for adaptive mode (0.5,0.1,3.0)
[=== Separator ===] InpENDOFFILTERS = "=== END OF Filters ===" // Section header for inputs
[=== Separator ===] InpExitSectionHeader = "=== EXIT STRATEGIES ===" // Section header for inputs
[=== Profit Scaling Exit ===] InpEnableProfitScaling = false // Enable partial profit taking
[=== Profit Scaling Exit ===] InpScalingLevels = 3 // Number of scaling levels (1,1,5)
[=== Profit Scaling Exit ===] InpScalingTargets = "50,100,200" // Profit targets (points), comma-separated
[=== Profit Scaling Exit ===] InpScalingPercents = "30,30,40" // % to close at each level
[=== Position Time Management ===] InpEnableMaxHoldingTime = false // Enable position time limits
[=== Position Time Management ===] InpMaxHoldingHours = 14 // Maximum holding time (hours) (1,1,240)
[=== Position Time Management ===] InpCloseProfitableOnly = true // Close only profitable positions
[=== Position Time Management ===] InpMinProfitThreshold = 0.0 // Profit threshold (points) (0.0,1.0,500.0)
[=== Momentum Exit ===] InpEnableMomentumExit = false // Exit on momentum loss
[=== Momentum Exit ===] InpMomTimeframe = 7 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
[=== Momentum Exit ===] InpMomRsiPeriod = 124 // RSI period for momentum exit (5,1,30)
[=== Momentum Exit ===] InpMomRsiOverbought = 70.0 // RSI exit for buys (60.0,1.0,100.0)
[=== Momentum Exit ===] InpMomRsiOversold = 40.0 // RSI exit for sells (0.0,1.0,40.0)
[=== Momentum Exit ===] InpMomAdxPeriod = 14 // ADX period for exit (7,1,30)
[=== Momentum Exit ===] InpMomAdxWeakThreshold = 0.0 // Exit when ADX drops below (5.0,1.0,40.0)
[=== Volatility Spike Exit ===] InpEnableVolatilityExit = false // Exit on ATR spike
[=== Volatility Spike Exit ===] InpVolExitAtrTimeframe = 0 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
[=== Volatility Spike Exit ===] InpVolExitAtrPeriod = 79 // ATR period (5,1,50)
[=== Volatility Spike Exit ===] InpVolExitAtrAvgPeriod = 25 // ATR average period (10,1,200)
[=== Volatility Spike Exit ===] InpVolSpikeMultiplier = 1.8 // ATR spike threshold vs avg (1.0,0.1,10.0)
[=== Volatility Spike Exit ===] InpVolExitProfitOnly = true // Require profit before ATR spike exit
[=== S/R Exit ===] InpEnableSRExit = false // Exit at key levels
[=== S/R Exit ===] InpSRLookbackBars = 50 // Bars to find swing points (5,1,500)
[=== S/R Exit ===] InpSRDistancePoints = 20.0 // Distance to trigger exit (1.0,1.0,1000.0)
[=== S/R Exit ===] InpSRExitProfitOnly = false // Only if profitable
[=== CCI Exhaustion Exit ===] InpEnableCCIExit = true // Enable CCI exhaustion exit
[=== CCI Exhaustion Exit ===] InpCCITimeframe = 5 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // CCI timeframe
[=== CCI Exhaustion Exit ===] InpCCIPeriod = 28 // CCI period (10,1,50)
[=== CCI Exhaustion Exit ===] InpCCIPrice = 1 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // CCI applied price
[=== CCI Exhaustion Exit ===] InpCCIOverbought = 345.0 // Overbought level (100.0,10.0,300.0)
[=== CCI Exhaustion Exit ===] InpCCIOversold = -585.0 // Oversold level (-300.0,10.0,-100.0)
[=== CCI Exhaustion Exit ===] InpCCIUseDivergence = true // Detect divergence
[=== CCI Exhaustion Exit ===] InpCCIDivergenceBars = 32 // Divergence lookback bars (3,1,20)
[=== CCI Exhaustion Exit ===] InpCCICloseProfit = true // Close profitable positions
[=== CCI Exhaustion Exit ===] InpCCICloseLoss = false // Close losing positions too
[=== CCI Exhaustion Exit ===] InpCCIMinProfitPoints = 51.0 // Min profit to close (0.0,1.0,100.0)
[=== MACD Histogram Slope Exit ===] InpEnableMACDSlopeExit = false // Enable MACD slope exit
[=== MACD Histogram Slope Exit ===] InpMACDTimeframe = 0 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // MACD timeframe
[=== MACD Histogram Slope Exit ===] InpMACDFastEMA = 12 // Fast EMA (5,1,50)
[=== MACD Histogram Slope Exit ===] InpMACDSlowEMA = 26 // Slow EMA (10,1,100)
[=== MACD Histogram Slope Exit ===] InpMACDSignal = 9 // Signal line (5,1,20)
[=== MACD Histogram Slope Exit ===] g_InpMacdPrice = 1 // Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // MACD applied price
[=== MACD Histogram Slope Exit ===] InpMACDWatchHistogram = true // Monitor histogram slope
[=== MACD Histogram Slope Exit ===] InpMACDSlopeBars = 2 // Bars for slope calculation (1,1,5)
[=== MACD Histogram Slope Exit ===] InpMACDWaitZeroCross = false // Wait for zero line cross
[=== MACD Histogram Slope Exit ===] InpMACDCloseProfit = true // Close profitable positions
[=== MACD Histogram Slope Exit ===] InpMACDCloseLoss = false // Close losing positions too
[=== MACD Histogram Slope Exit ===] InpMACDMinProfitPoints = 5.0 // Min profit to close (0.0,1.0,100.0)
[=== MACD Histogram Slope Exit ===] InpMACDMinSlopeThreshold = 0.0001 // Min histogram change (0.0,0.00001,0.001)
[=== Swing Reversal Exit ===] InpEnableSwingExit = false // Enable swing reversal exit
[=== Swing Reversal Exit ===] InpSwingLeftBars = 3 // Left bars for swing (2,1,10)
[=== Swing Reversal Exit ===] InpSwingRightBars = 2 // Right bars for swing (1,1,10)
[=== Swing Reversal Exit ===] InpSwingMinSize = 20.0 // Min swing size points (5.0,1.0,100.0)
[=== Swing Reversal Exit ===] InpSwingPartialClose = true // Close half positions first
[=== Swing Reversal Exit ===] InpSwingCloseProfit = true // Close profitable positions
[=== Swing Reversal Exit ===] InpSwingCloseLoss = false // Close losing positions too
[=== Swing Reversal Exit ===] InpSwingMinProfitPoints = 15.0 // Min profit to close (0.0,1.0,100.0)
[=== Swing Reversal Exit ===] InpSwingMaxAge = 3 // Max bars ago for swing (1,1,10)
[=== Stochastic Momentum Exit ===] InpEnableStochExit = true // Enable stochastic exit
[=== Stochastic Momentum Exit ===] InpStochTimeframe = 5 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Stochastic timeframe
[=== Stochastic Momentum Exit ===] InpStochKPeriod = 47 // %K period (5,1,50)
[=== Stochastic Momentum Exit ===] InpStochDPeriod = 27 // %D period (2,1,20)
[=== Stochastic Momentum Exit ===] InpStochSlowing = 23 // Slowing (1,1,10)
[=== Stochastic Momentum Exit ===] InpStochOverbought = 512.0 // Overbought (70.0,5.0,100.0)
[=== Stochastic Momentum Exit ===] InpStochOversold = 110.0 // Oversold (0.0,5.0,30.0)
[=== Stochastic Momentum Exit ===] InpStochWaitCross = true // Wait for %K/%D crossover
[=== Stochastic Momentum Exit ===] InpStochCloseProfit = false // Close profitable positions
[=== Stochastic Momentum Exit ===] InpStochCloseLoss = true // Close losing positions too
[=== Stochastic Momentum Exit ===] InpStochMinProfitPoints = 26.0 // Min profit to close (0.0,1.0,100.0)
[=== Rate of Change (ROC) Exit ===] InpEnableROCExit = false // Enable ROC momentum exit
[=== Rate of Change (ROC) Exit ===] InpROCTimeframe = 0 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // ROC timeframe
[=== Rate of Change (ROC) Exit ===] InpROCPeriod = 12 // ROC lookback period (5,1,50)
[=== Rate of Change (ROC) Exit ===] InpROCThreshold = 0.5 // Min ROC to stay in (0.0,0.1,5.0)
[=== Rate of Change (ROC) Exit ===] InpROCWeakBars = 2 // Consecutive weak bars (1,1,5)
[=== Rate of Change (ROC) Exit ===] InpROCCloseNewest = false // Close newest positions first
[=== Rate of Change (ROC) Exit ===] InpROCCloseProfit = true // Close profitable positions
[=== Rate of Change (ROC) Exit ===] InpROCCloseLoss = false // Close losing positions too
[=== Rate of Change (ROC) Exit ===] InpROCMinProfitPoints = 0.0 // Min profit to close (0.0,1.0,100.0)
[=== Multi-Timeframe Alignment Exit ===] InpEnableMTFExit = false // Enable MTF trend exit
[=== Multi-Timeframe Alignment Exit ===] InpMTFTimeframe = 8 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Higher timeframe to monitor
[=== Multi-Timeframe Alignment Exit ===] InpMTFMAPeriod = 50 // MA period for trend (20,1,200)
[=== Multi-Timeframe Alignment Exit ===] InpMTFMAMethod = MODE_EMA // MA method
[=== Multi-Timeframe Alignment Exit ===] InpMTFCloseOnCross = true // Close when price crosses MA
[=== Multi-Timeframe Alignment Exit ===] InpMTFPartialExit = true // Close oldest 50% first
[=== Multi-Timeframe Alignment Exit ===] InpMTFCloseProfit = true // Close profitable positions
[=== Multi-Timeframe Alignment Exit ===] InpMTFCloseLoss = false // Close losing positions too
[=== Multi-Timeframe Alignment Exit ===] InpMTFMinProfitPoints = 20.0 // Min profit to close (0.0,1.0,100.0)
[=== Parabolic SAR Exit ===] InpEnableSARExit = false // Enable SAR flip exit
[=== Parabolic SAR Exit ===] InpSARTimeframe = 0 // Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // SAR timeframe
[=== Parabolic SAR Exit ===] InpSARStep = 0.02 // SAR step (0.01,0.001,0.1)
[=== Parabolic SAR Exit ===] InpSARMaximum = 0.2 // SAR maximum (0.1,0.01,0.5)
[=== Parabolic SAR Exit ===] InpSARCloseAll = true // Close all positions on flip
[=== Parabolic SAR Exit ===] InpSARCloseProfit = true // Close profitable positions
[=== Parabolic SAR Exit ===] InpSARCloseLoss = false // Close losing positions too
[=== Parabolic SAR Exit ===] InpSARMinProfitPoints = 0.0 // Min profit to close (0.0,1.0,100.0)
[=== Separator ===] InpExitSectionHeaderEND = "=== END OF EXIT STRATEGIES ===" // Section header for inputs
[=== Separator ===] InputDashboardSectionHeader = "=== DASHBOARD AND Visualization ===" // Section header for inputs
[=== Dashboard Settings ===] InpShowDashboard = false // Display on-chart dashboard
[=== Dashboard Settings ===] InpDashboardX = 8 // Dashboard X position (pixels)
[=== Dashboard Settings ===] InpDashboardY = 28 // Dashboard Y position (pixels)
[=== Dashboard Settings ===] InpDashboardWidth = 360 // Dashboard width (pixels)
[=== Dashboard Settings ===] InpDashboardBgColor = (color)525572 // Dashboard background color
[=== Dashboard Settings ===] InpDashboardBgOpacity = 245 // Dashboard fill opacity (0 transparent, 255 solid) (0,1,255)
[=== Dashboard Settings ===] InpDashboardTextColor = (color)16777215 // Dashboard text color
[=== Dashboard Settings ===] InpDashboardAccentColor = (color)16748574 // Dashboard header/accent color
[=== Chart Visualization ===] InpAttachHullIndicators = false // Show Hull indicator overlays on chart
[=== Chart Visualization ===] InpHullIndicatorSubwindow = 1 // Subwindow index for Hull overlays (0=main chart, 1+=subwindows)
[=== Chart Visualization ===] InpShowRsiIndicator = false // Display RSI indicator visualization
[=== Chart Visualization ===] InpRsiIndicatorSubwindow = 2 // Subwindow index for RSI visualization (1+=subwindows)
[=== Chart Visualization ===] InpShowAdxIndicator = false // Display ADX indicator visualization
[=== Chart Visualization ===] InpAdxIndicatorSubwindow = 3 // Subwindow index for ADX visualization (1+=subwindows)
[=== Chart Visualization ===] InpShowAtrIndicator = false // Display ATR indicator visualization
[=== Chart Visualization ===] InpAtrIndicatorSubwindow = 4 // Subwindow index for ATR visualization (1+=subwindows)

Pseudocode

// Pipsgrowth EX16104 Trend — Execution Flow (from source analysis)
// Family: Trend
// Expert Advisor that trades using four Hull V7 indicators with advanced exit strategies and multi-layer risk management. 12 layers: REGIME, SIGNAL, ENTRY, CONFIRM, NO-TRADE, CAPITAL CAP, RISK, SIZING, MANAGE, EXIT, SCALING, OnTester

ON_INIT:
    Create indicator handles: tfRsiHandle, tfEmaFastHandle, tfEmaSlowHandle
    Initialize state variables
    Detect broker GMT offset

ON_TICK:
    1. Refresh indicator buffers (closed-bar shift=1)
    2. Manage existing positions:
       - Break-even check
       - ATR trailing stop
       - Profit lock ratchet
       - Time-based exit
       - Opposite-signal exit
    3. If new bar:
       a. ClassifyRegime() — ADX/ATR/BB regime detection
       b. NoTradeGate() checks:
          - Market open + session filter
          - Spread limit
          - Cooldown after loss
          - Consecutive loss limit
          - Kill switch
          - Max drawdown
          - Max concurrent positions
          - Daily/weekly loss limits
       c. GenerateSignal() — strategy-specific entry logic
       d. CheckConfirm() — HTF alignment + R:R + ADX minimum
       e. Calculate position size from risk %
       f. Execute with retry logic
       g. Mark bar to prevent duplicates

ON_TESTER:
    Custom fitness = weighted(RecoveryFactor, ROI, ProfitFactor, TradeCount, Sharpe, Drawdown)

Optimization Profile

Optimized Brokers:

ExnessIC Markets

Optimized Symbols:

XAUUSD

Optimized Timeframes:

M5H1

How to Install This EA on MT5

1Download the .mq5 file using the button above
2Open MetaTrader 5 on your computer
3Click File → Open Data Folder in the top menu
4Navigate to MQL5 → Experts and paste the .mq5 file there
5In MT5, right-click Expert Advisors in the Navigator panel → Refresh
6Drag the EA onto an H4 or Daily chart for best results
7Configure EMA periods, ADX threshold, and lot size in the dialog
8Enable Allow Algo Trading and click OK

EA Parameters

Parameter	Default	Description
InpLots	0.10	Fixed lot size (0.01,0.01,50.0)
InpSlippagePoints	20	Max slippage (points) (0,1,100)
InpMagicNumber	22216104	Magic number (1,1,99999999)
InpTradeComment	"Psgrowth.com Expert_16104"	Trade comment for new positions
InpMoneyManagementMode	MM_MODE_PERCENT_RISK	Money management mode
InpRiskPerTradePercent	5.5	Risk per trade (% of balance) (0.1,0.1,10.0)
InpLotRoundingMode	LOT_ROUND_NEAREST	Lot rounding mode
InpStopLossPoints	200.0	Initial stop loss (points) (10.0,1.0,5000.0)
InpTakeProfitPoints	2000.0	Initial take profit (points) (10.0,1.0,10000.0)
InpEnableMarginGuard	true	Enforce minimum margin level before new trades
InpMinMarginLevelPerc	240.0	Minimum margin level (%) (100.0,1.0,1000.0)
InpEnableFreeMarginGuard	false	Enforce minimum free margin before new trades
InpMinFreeMarginCurrency	0.0	Minimum free margin (account currency)
InpEnableTrailingStop	true	Master toggle for trailing stop management
InpTrailingTriggerPts	550.0	Trailing stop trigger (points) (5.0,1.0,500.0)
InpTrailingStepPts	20.0	Trailing stop step (points) (10.0,1.0,2000.0)
InpEnableBreakEven	true	Move SL to break-even
InpBreakEvenTrigger	288.0	Profit trigger (points) (5.0,1.0,500.0)
InpBreakEvenOffset	35.0	Offset from entry (points) (0.0,1.0,100.0)
InpEnableProfitLock	false	Lock profits
InpProfitLockIncrement	500.0	Lock every X points (10.0,1.0,500.0)
InpProfitLockStep	20.0	Distance from current price (1.0,1.0,200.0)
InpEnableProfitGate	true	Require existing trades be in profit
InpProfitGatePoints	10.0	Minimum profit (points) per trade (1.0,1.0,500.0)
InpMaxOpenPositions	0	Maximum open positions (0=unlimited) (0,1,100)
InpEnablePermanentStop	false	Enable permanent stop (hard shutdown)
InpPermanentStopUseDrawdownPercent	true	Use drawdown % threshold for permanent stop
InpPermanentStopDrawdownPercent	20.0	Max drawdown % to trigger permanent stop (1.0,0.5,50.0)
InpPermanentStopUseDrawdownCurrency	true	Use drawdown currency threshold for permanent stop
InpPermanentStopDrawdownCurrency	2000.0	Max drawdown $ to trigger permanent stop (10.0,10.0,10000.0)
InpPermanentStopUseConsecutiveLosses	true	Use consecutive loss threshold for permanent stop
InpPermanentStopConsecutiveLosses	10	Max consecutive losses to trigger permanent stop (1,1,20)
InpPermanentStopCloseAll	true	Close all positions on permanent stop
InpPermanentStopNotify	true	Send alert on permanent stop
InpEnableTemporaryPause	false	Enable temporary pause (recoverable)
InpPauseUseDrawdownPercent	true	Use drawdown % trigger for temporary pause
InpPauseDrawdownPercent	10.0	Drawdown % to trigger pause (1.0,0.5,50.0)
InpPauseUseDrawdownCurrency	true	Use drawdown currency trigger for temporary pause
InpPauseDrawdownCurrency	1000.0	Drawdown $ to trigger pause (10.0,10.0,10000.0)
InpPauseUseConsecutiveLosses	true	Use consecutive loss trigger for temporary pause
InpPauseConsecutiveLosses	5	Consecutive losses to trigger pause (1,1,20)
InpPauseUseCooldown	true	Apply cooldown timer for temporary pause
InpPauseCooldownMinutes	60	Cooldown period before auto-resume (0,10,1440)
InpPauseClosePositions	true	Close positions when pause triggers
InpPauseNotify	true	Send alert when pause triggers
InpEnableDailyLimit	false	Enable daily loss limit
InpDailyLimitUseCurrency	true	Use currency-based daily loss limit
InpDailyLossLimitCurrency	500.0	Max daily loss in account currency (50.0,10.0,10000.0)
InpDailyLimitUsePercent	true	Use percentage-based daily loss limit
InpDailyLossLimitPercent	5.0	Max daily loss as % of balance (0.5,0.1,25.0)
InpDailyLimitResumeNextDay	true	Auto-resume at next market day
InpDailyLimitNotify	true	Send alert when daily limit triggers
InpEnableSequenceProtection	false	Enable trade sequence monitoring
InpSequenceUseConsecutiveSameSide	true	Use consecutive same-side trades trigger
InpMaxConsecutiveSameSide	5	Max consecutive trades in same direction (3,1,15)
InpSequenceUseWinRate	true	Use win-rate trigger
InpRequiredWinRatePercent	40.0	Minimum required win rate % (25.0,1.0,75.0)
InpWinRateMonitoringTrades	10	Trades to monitor for win rate (5,5,50)
InpPauseOnLowWinRate	true	Pause trading on low win rate
InpPauseDurationHours	12	Pause duration in hours (1,1,48)
InpEnableVolatilityGuard	false	Pause during extreme volatility
InpVolatilityMultiplier	2.5	Volatility threshold vs average (1.5,0.1,5.0)
InpVolatilitySamplePeriod	20	Bars to measure volatility (10,5,50)
InpVolatilityAdaptSlippage	true	Adjust max slippage based on volatility
InpVolatilityMaxSlippageFactor	3.0	Maximum slippage multiplier (1.5,1.0,10.0)
InpEnableExposureLimit	false	Limit total risk exposure
InpExposureUsePositionPercent	true	Use exposure percentage limit
InpMaxPositionValuePercent	15.0	Max position size % of equity (5.0,1.0,50.0)
InpExposureUseEquityRatio	false	Use equity/balance ratio floor
InpEquityToBalanceMinRatio	0.95	Min equity/balance ratio (0.80,0.50,1.0)
InpReducePositionSizeOnDrawdown	false	Reduce position sizing during drawdown
InpPositionSizeReduceFactor	0.5	Position size reduction factor (0.5,0.1,0.9)
InpEnableRecoveryMode	false	Use recovery after drawdown
InpRecoveryStartPercent	10.0	Drawdown % to activate recovery (5.0,1.0,25.0)
InpRecoveryLotMultiplier	0.5	Position size reduction factor (0.5,0.1,1.0)
InpRecoverySuccessTrades	3	Profitable trades to exit recovery (2,1,10)
InpRecoveryReduceRisk	true	Use tighter stops in recovery mode
InpEnableConnectionMonitor	false	Monitor connection stability
InpMaxExecutionTimeMS	1000	Max execution time in ms (500,100,5000)
InpMaxOrderRetries	3	Max order retries on failure (2,1,10)
InpOrderRetryDelayMS	1000	Delay between retries in ms (500,100,5000)
InpForceCloseOnTimeout	true	Close positions on persistent timeouts
InpEnableDebugTree	false	Enable tree-style debug logging
InpDebugTreeIncludeTimestamp	true	Include timestamps in debug output
InpmainSignal	"=== Main Signal ==="	Section header for inputs
InpUseExitConsensus	true	Use coordinated exit consensus
InpEnableProfitConsensus	true	Require consensus for profitable exits
InpMinExitsAgreeProfit	1	Min exits agreeing to close profitable (1,1,7)
InpEnableLossConsensus	true	Require agreement for loss exits
InpMinExitsAgreeLoss	1	Min exits agreeing to close losing (1,1,7)
InpExitConsensusProfitThreshold	45.0	Min profit (points) for consensus exit (0.0,1.0,100.0)
InpAllowIndividualExits	false	Allow individual strategies to exit independently
InpIndividualExitsProfitOnly	false	Individual exits require profit
InpIndividualExitMinProfit	30.0	Min profit for individual exit (0.0,1.0,100.0)
InpSignalBarShift	1	Signal bar shift (0=current,1=closed)
InpMinIndicatorsAgreeForInitialTrades	2	Minimum Hulls agreeing for initial entries (1,1,4)
InpMinIndicatorsAgreeForAdditonalTrades	1	Minimum Hulls agreeing for additional entries (1,1,4)
InpRequireStableSignal	true	Require consensus to persist
InpStableBarsRequired	2	Consecutive bars with same consensus (1,1,10)
Hull1_Enabled	true	Enable Hull 1
Hull1_Period	65	Hull period (2,1,600)
Hull1_Divisor	16.5	Hull divisor ("speed")
Hull1_Price	7	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // Applied price
Hull1_Timeframe	1	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Evaluation timeframe (PERIOD_CURRENT=chart)
Hull3_Enabled	true	Enable Hull 3
Hull3_Period	48	Hull Period (9,1,600)
Hull3_Divisor	6.2	Hull Divisor (2.0,0.1,25.0)
Hull3_Price	5	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted)
Hull3_Timeframe	7	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
Hull3_FlatSensitivity	2.5	Flat Sensitivity (1.0,0.5,40.0)
Hull3_FlatBars	1	Flat Bars (1,1,20)
Hull3_AdxTimeframe	5	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
Hull3_AdxPeriod	101	ADX Period (7,1,100)
Hull3_AdxThreshold	84.0	ADX Threshold (20.0,0.5,80.0)
Hull3_MomentumLookback	40	Momentum Lookback (3,1,50)
Hull3_MomentumPoints	12.0	Momentum Points (5.0,0.5,100.0)
Hull4_Enabled	true	Enable Hull 4
Hull4_Period	185	Hull Period (9,1,1000)
Hull4_Divisor	13.4	Hull Divisor (1.0,0.1,40.0)
Hull4_Price	3	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted)
Hull4_Timeframe	7	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
Hull4_FlatSensitivity	6.0	Flat Sensitivity (1.0,0.5,40.0)
Hull4_FlatBars	7	Flat Bars (1,1,20)
Hull4_AdxTimeframe	7	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
Hull4_AdxPeriod	116	ADX Period (7,1,50)
Hull4_AdxThreshold	192.0	ADX Threshold (10.0,0.5,60.0)
Hull4_MomentumLookback	20	Momentum Lookback (3,1,50)
Hull4_MomentumPoints	41.0	Momentum Points (1.0,0.5,40.0)
InpCloseOnOpposite	true	Close trades on opposite agreement if in profit
InpMinIndicatorsAgreeCloseProfit	3	Minimum Hulls to close in profit (1,1,4)
InpCloseProfitPoints	80.0	Minimum profit (points) to close on opposite (0.0,1.0,200.0)
InpCloseOnOppositeEvenIfInLose	true	Close trades on opposite agreement even if losing
InpMinIndicatorsAgreeCloseLoss	4	Minimum Hulls to close even if losing (1,1,4)
InpFilters	"=== Start of Filters ==="	Section header for inputs
InpEnableRsiConfirmation	true	Require RSI confirmation for entries
InpRsiTimeframe	0	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
InpRsiPeriod	41	RSI Period (5,1,30)
InpRsiPrice	1	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted)
InpRsiBuyMin	36.0	RSI Buy Min (0.0,1.0,50.0)
InpRsiBuyMax	70.0	RSI Buy Max (50.0,1.0,80.0)
InpRsiSellMin	40.0	RSI Sell Min (20.0,1.0,50.0)
InpRsiSellMax	53.0	RSI Sell Max (70.0,1.0,100.0)
InpEnableHtfRsiFilter	false	Enable HTF RSI confirmation filter
InpHtfRsiUseForInitialTrades	true	Use for initial trade entries
InpHtfRsiUseForAdditionalTrades	false	Use for additional trades (same direction)
InpHtfRsiTimeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // HTF RSI timeframe
InpHtfRsiPeriod	34	HTF RSI Period (5,1,200)
InpHtfRsiPrice	1	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // HTF RSI applied price
InpHtfRsiBuyMin	35.0	HTF RSI Buy Min (0.0,1.0,50.0)
InpHtfRsiBuyMax	70.0	HTF RSI Buy Max (50.0,1.0,80.0)
InpHtfRsiSellMin	30.0	HTF RSI Sell Min (20.0,1.0,50.0)
InpHtfRsiSellMax	60.0	HTF RSI Sell Max (70.0,1.0,100.0)
InpEnableMacdFilter	false	Enable MACD confirmation filter
InpMacdUseForInitialTrades	true	Use for initial trade entries
InpMacdUseForAdditionalTrades	false	Use for additional trades
InpMacdTimeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // MACD timeframe
InpMacdFastEma	12	MACD Fast EMA (5,1,50)
InpMacdSlowEma	26	MACD Slow EMA (10,1,100)
InpMacdSignalPeriod	9	MACD Signal Period (5,1,30)
InpMacdPrice	1	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // MACD Applied Price
InpMacdRequireHistogramPositive	true	Histogram must be positive for BUY
InpMacdRequireMainAboveSignal	true	Main line must be above signal for BUY
InpMacdRequireZeroCross	false	Require recent zero-line cross
InpMacdCrossBarsLookback	5	Max bars since zero cross (1,1,20)
InpMacdRequireMinHistogram	false	Require minimum histogram strength
InpMacdMinHistogramValue	0.0001	Min histogram absolute value (0.0,0.00001,0.01)
InpMacdRequireIncreasingMomentum	false	Histogram must be growing
InpMacdMomentumBarsCheck	2	Bars to check momentum growth (1,1,5)
InpEnableHTFEmaFilter	false	Enable HTF EMA confirmation filter
InpHTFEma_UseForInitialTrades	true	Use for initial trade entries
InpHTFEma_UseForAdditionalTrades	false	Use for additional trades (same direction)
InpHTFEma_Timeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // HTF EMA timeframe
InpHTFEma_FastPeriod	21	Fast EMA period (5,1,200)
InpHTFEma_SlowPeriod	50	Slow EMA period (10,1,500)
InpHTFEma_Price	1	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // EMA applied price
InpHTFEma_Mode	HTF_EMA_ALL_ALIGNED	EMA confirmation mode
InpHTFEma_CrossoverBars	5	Max bars since crossover (1,1,20)
InpHTFEma_RequireMinSeparation	false	Require minimum EMA separation
InpHTFEma_MinSeparationPoints	10.0	Min separation in points (1.0,1.0,500.0)
InpHTFEma_RequirePriceDistance	false	Require price distance from EMAs
InpHTFEma_MinPriceDistancePoints	5.0	Min distance in points (1.0,1.0,200.0)
InpHTFEma_RequireSlope	false	Require EMA slope alignment
InpHTFEma_SlopeLookback	3	Bars for slope calculation (2,1,10)
InpHTFEma_MinSlopePoints	1.0	Min slope in points (0.1,0.1,50.0)
InpHTFEma_WaitForPullback	false	Wait for price pullback to fast EMA
InpHTFEma_PullbackTolerancePoints	20.0	Pullback tolerance in points (5.0,1.0,100.0)
InpHTFEma_UseAdaptiveThresholds	false	Use ATR-based adaptive thresholds
InpHTFEma_AdaptiveAtrPeriod	14	ATR period for adaptive mode (5,1,50)
InpHTFEma_AdaptiveMultiplier	1.5	Multiplier for adaptive thresholds (0.5,0.1,5.0)
InpEnablePriceActionFilter	false	Enable price action confirmation
InpPA_UseForInitialTrades	true	Use for initial trade entries
InpPA_UseForAdditionalTrades	false	Use for additional trades (same direction)
InpPA_RequireEngulfing	false	Require engulfing candle pattern
InpPA_RequirePinBar	false	Require pin bar/rejection pattern
InpPA_PinBarWickRatio	2.0	Min wick/body ratio for pin bar (1.5,0.5,5.0)
InpPA_RequireInsideBar	false	Require inside bar breakout
InpPA_AllowAnyPattern	true	Accept trade if ANY pattern matches (vs ALL)
InpPA_RequireBodySize	true	Require minimum candle body
InpPA_MinBodyPercent	50.0	Min body % of total range (30.0,5.0,90.0)
InpPA_BlockDoji	true	Block doji/spinning top patterns
InpPA_DojiThreshold	30.0	Max body % for doji (10.0,5.0,40.0)
InpPA_RequireCloseInDirection	true	Close must be in trade direction
InpPA_MinClosePositionPercent	60.0	Min close position in range % (50.0,10.0,90.0)
InpPA_RequireMinBarSize	true	Require minimum bar size
InpPA_MinBarSizePoints	8	Minimum bar size in points (2,1,50)
InpPA_UseATRForBarSize	true	Use ATR-based dynamic sizing
InpPA_MinATRMultiplier	0.3	Min bar size as ATR multiple (0.1,0.1,2.0)
InpPA_ATRPeriod	14	ATR period for bar sizing (10,5,50)
InpPA_RequireConsecutiveBars	false	Require consecutive bars in direction
InpPA_ConsecutiveCount	2	Number of consecutive bars (2,1,5)
InpPA_RequireHigherClose	true	BUY: close > prev close \| SELL: close < prev
InpPA_RequireHigherHigh	false	BUY: high > prev high \| SELL: low < prev low
InpPA_LimitWickSize	true	Limit opposing wick size
InpPA_MaxOpposingWickPercent	40.0	Max opposing wick % of range (20.0,10.0,70.0)
InpPA_RequireStrongClose	true	Close in top/bottom third of bar
InpPA_StrongClosePercent	70.0	Min % threshold for strong close (60.0,50.0,90.0)
InpEnableMTFTrendFilter	false	Enable MTF trend alignment
InpMTFTrend_UseForInitialTrades	true	Use for initial trade entries
InpMTFTrend_UseForAdditionalTrades	false	Use for additional trades
InpMTFTrend_Timeframe1	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Trend timeframe 1 (intermediate)
InpMTFTrend_Timeframe2	9	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Trend timeframe 2 (higher)
InpMTFTrend_Timeframe3	10	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Trend timeframe 3 (daily)
InpMTFTrend_MA1Period	20	TF1 MA period (10,1,200)
InpMTFTrend_MA2Period	50	TF2 MA period (10,1,200)
InpMTFTrend_MA3Period	100	TF3 MA period (10,1,200)
InpMTFTrend_MAMethod	MODE_EMA	MA calculation method
InpMTFTrend_MAPrice	1	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // MA applied price
InpMTFTrend_MinAligned	2	Min timeframes aligned (1,1,3)
InpMTFTrend_RequirePriceAbove	true	Price must be above/below all MAs
InpMTFTrend_RequireSlope	false	Require MA slope in direction
InpMTFTrend_SlopeLookback	3	Bars for slope calculation (2,1,10)
InpEnableAdxTrendFilter	false	Enable ADX trend filter
InpAdxTrend_UseForInitialTrades	true	Use for initial trade entries
InpAdxTrend_UseForAdditionalTrades	false	Use for additional trades
InpAdxTrend_Timeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // ADX timeframe
InpAdxTrend_Period	14	ADX period (7,1,50)
InpAdxTrend_MinStrength	25.0	Min ADX value for trend (15.0,5.0,50.0)
InpAdxTrend_RequireDIAlignment	true	Require DI+/DI- directional confirmation
InpAdxTrend_MinDISeparation	5.0	Min DI+/DI- separation (0.0,1.0,20.0)
InpAdxTrend_RequireRising	false	Require ADX to be rising (strengthening trend)
InpAdxTrend_RisingBars	2	Bars to confirm ADX rise (1,1,5)
InpEnableSupertrendFilter	false	Enable Supertrend filter
InpSupertrend_UseForInitialTrades	true	Use for initial trade entries
InpSupertrend_UseForAdditionalTrades	false	Use for additional trades
InpSupertrend_Timeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Supertrend timeframe
InpSupertrend_Period	10	ATR period (7,1,50)
InpSupertrend_Multiplier	3.0	ATR multiplier (1.0,0.5,10.0)
InpSupertrend_RequireConsecutiveBars	false	Require X bars in same trend state
InpSupertrend_ConsecutiveCount	2	Consecutive bars required (1,1,5)
InpEnableIchimokuFilter	false	Enable Ichimoku filter
InpIchimoku_UseForInitialTrades	true	Use for initial trade entries
InpIchimoku_UseForAdditionalTrades	false	Use for additional trades
InpIchimoku_Timeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Ichimoku timeframe
InpIchimoku_TenkanPeriod	9	Tenkan-sen period (5,1,20)
InpIchimoku_KijunPeriod	26	Kijun-sen period (10,1,50)
InpIchimoku_SenkouPeriodB	52	Senkou Span B period (20,1,100)
InpIchimoku_RequireAboveCloud	true	BUY: price above cloud, SELL: below
InpIchimoku_RequireTKCross	false	Require Tenkan/Kijun crossover
InpIchimoku_CrossLookback	5	Max bars since TK cross (1,1,20)
InpIchimoku_RequireChikouClear	true	Chikou must be clear (not in price)
InpEnableVwapFilter	false	Enable VWAP filter
InpVwap_UseForInitialTrades	true	Use for initial trade entries
InpVwap_UseForAdditionalTrades	false	Use for additional trades
InpVwap_Timeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // VWAP timeframe
InpVwap_Period	20	VWAP period (10,1,100)
InpVwap_RequirePriceAbove	true	BUY: price > VWAP, SELL: price < VWAP
InpVwap_RequireSlope	true	VWAP must slope in trade direction
InpVwap_SlopeLookback	3	Bars for slope calculation (2,1,10)
InpVwap_RequireMinDistance	false	Require min distance from VWAP
InpVwap_MinDistancePoints	5.0	Min distance in points (1.0,1.0,100.0)
InpEnableCorrelationMonitor	true	Enable correlation monitoring
InpCorrelationBlockEntries	true	Block new entries on correlation breakdown
InpCorrelationClosePositions	false	Close positions when correlation breaks down
InpCorrelationTimeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Correlation timeframe
InpCorrelationLookback	35	Bars to evaluate correlation (10,1,500)
InpCorrelationMinThreshold	3.975	Minimum absolute correlation allowed (0.1,0.01,0.99)
InpCorrelationDivergenceTrigger	0.25	Minimum change to flag breakdown (0.05,0.01,1.0)
InpCorrelationConfirmBars	1	Consecutive bars required to confirm breakdown (1,1,10)
InpCorrelationSymbolSuffix	"m"	Broker symbol suffix (auto-appended)
InpCorrWatch_EURUSD	false	Monitor EURUSD correlation
InpCorrWatch_GBPUSD	false	Monitor GBPUSD correlation
InpCorrWatch_AUDUSD	false	Monitor AUDUSD correlation
InpCorrWatch_NZDUSD	false	Monitor NZDUSD correlation
InpCorrWatch_USDJPY	true	Monitor USDJPY correlation
InpCorrWatch_USDCAD	false	Monitor USDCAD correlation
InpCorrWatch_USDCHF	true	Monitor USDCHF correlation
InpCorrWatch_XAUUSD	false	Monitor XAUUSD correlation
InpEnableBarRangeFilter	false	Require minimum average bar range
InpBarRangeLookback	5	Number of bars to average (2,1,50)
InpMinBarRangePoints	50.0	Minimum average range (points) (1.0,1.0,1000.0)
InpEnableNFPFilter	true	Block trading on first Friday (NFP)
InpNFPStartHour	8	NFP release hour (broker time) (0,1,23)
InpNFPStartMinute	30	NFP release minute (0,1,59)
InpNFPAvoidMinutesBefore	30	Stop trading X min before NFP (5,1,120)
InpNFPAvoidMinutesAfter	30	Resume trading X min after NFP (5,1,120)
InpNFPClosePositions	false	Close positions before NFP
InpNFPCloseMinutesBefore	10	Close X min before NFP (1,1,60)
InpNFPCloseProfitOnly	true	Only close profitable positions
InpEnableEventPauseFilter	false	Enable CSV-driven event blackout
InpEventPauseCsvFile	"USDJPY.csv"	CSV filename located in MQL5\Files
InpEventPauseReloadMinutes	60	Reload CSV every N minutes (0=load once)
InpEventPauseLeadMinutes	15	Start blocking N minutes before pause window
InpEventPauseLagMinutes	15	Continue blocking N minutes after pause window
InpEventPauseDefaultYear	0	Override year if CSV omits it (0=auto)
InpEventPauseSymbolKey	"USDJPY"	Symbol keyword to match events
InpEnableAtrFilter	true	Require minimum ATR
InpAtrTimeframe	6	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
InpAtrPeriod	60	ATR period (5,1,50)
InpAtrAveragePeriod	185	ATR average period (10,1,200)
InpAtrMultiplierMin	0.69	ATR must be >= average*multiplier (0.5,0.1,5.0)
InpEnableSpreadFilter	true	Block trades during wide spreads
InpMaxSpreadPoints	20.0	Maximum allowed spread (points) (1.0,1.0,200.0)
InpEnableVolumeFilter	true	Enable volume filter for entries
InpVolumeType	VOLUME_TICK	Volume type to analyze
InpVolumeTimeframe	7	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Volume data timeframe
InpVolumeThreshold	0	Minimum volume threshold (0=disabled)
InpUseVolumeAverage	true	Compare to average volume
InpVolumeAvgPeriod	10	Volume average period (5,1,100)
InpVolumeMultiplier	0.65	Volume must be >= average*multiplier (0.1,0.1,5.0)
InpEnableSessionFilters	true	Enable session-based trading
InpUseServerTime	true	Use broker server time (vs local)
InpTesterIgnoreMarketClosures	true	Ignore market closure guards while running in Strategy Tester
InpAsianSessionEnabled	true	Enable trading during Asian session
InpAsianSessionStartHour	4	Asian session start hour (0,1,23)
InpAsianSessionStartMinute	20	Asian session start minute (0,1,59)
InpAsianSessionEndHour	19	Asian session end hour (0,1,23)
InpAsianSessionEndMinute	40	Asian session end minute (0,1,59)
InpEuropeanSessionEnabled	true	Enable trading during European session
InpEuropeanSessionStartHour	4	European session start hour (0,1,23)
InpEuropeanSessionStartMinute	0	European session start minute (0,1,59)
InpEuropeanSessionEndHour	17	European session end hour (0,1,23)
InpEuropeanSessionEndMinute	0	European session end minute (0,1,59)
InpUSSessionEnabled	true	Enable trading during US session
InpUSSessionStartHour	0	US session start hour (0,1,23)
InpUSSessionStartMinute	0	US session start minute (0,1,59)
InpUSSessionEndHour	10	US session end hour (0,1,23)
InpUSSessionEndMinute	0	US session end minute (0,1,59)
InpCustomSessionEnabled	false	Enable trading during custom session
InpCustomSessionStartHour	22	Custom session start hour (0,1,23)
InpCustomSessionStartMinute	0	Custom session start minute (0,1,59)
InpCustomSessionEndHour	23	Custom session end hour (0,1,23)
InpCustomSessionEndMinute	59	Custom session end minute (0,1,59)
InpEnableEndOfDayClose	false	Close all trades at specific time
InpEndOfDayCloseHour	23	Close hour (0,1,23)
InpEndOfDayCloseMinute	45	Close minute (0,1,59)
InpEndOfDayProfitOnly	false	Only close profitable positions
InpEndOfDayBlockNewTrades	true	Block new trades after close time
InpEnableChoppinessFilter	true	Enable choppiness detection and filtering
InpChopRequireLayers	1	Layers required to confirm choppiness (1,1,4)
InpChopUseChopIndex	false	Enable Choppiness Index layer
InpChopIndexTimeframe	0	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // CHOP indicator timeframe
InpChopIndexPeriod	134	CHOP calculation period (10,1,50)
InpChopIndexThreshold	52.5	Choppy when CHOP > threshold (50.0,1.0,80.0)
InpChopUseAdx	false	Enable ADX trend strength layer
InpChopAdxTimeframe	0	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // ADX timeframe
InpChopAdxPeriod	45	ADX period (7,1,50)
InpChopAdxMinTrend	82.5	Choppy when ADX < threshold (15.0,1.0,40.0)
InpChopUseRangeCompression	true	Enable range compression detection
InpChopRangeTimeframe	7	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Range compression timeframe
InpChopRangeLookback	18	Bars to compare range compression (3,1,20)
InpChopRangeAtrPeriod	28	ATR period for range comparison (10,1,50)
InpChopRangeCompressionRatio	0.75	Choppy when range < ATR*ratio (0.2,0.1,1.0)
InpChopUseAdaptiveThresholds	false	Dynamically adjust thresholds based on volatility
InpChopAdaptiveAtrPeriod	50	ATR period for adaptive scaling (20,1,100)
InpChopAdaptiveMultiplier	1.5	Volatility multiplier for adaptive mode (0.5,0.1,3.0)
InpENDOFFILTERS	"=== END OF Filters ==="	Section header for inputs
InpExitSectionHeader	"=== EXIT STRATEGIES ==="	Section header for inputs
InpEnableProfitScaling	false	Enable partial profit taking
InpScalingLevels	3	Number of scaling levels (1,1,5)
InpScalingTargets	"50,100,200"	Profit targets (points), comma-separated
InpScalingPercents	"30,30,40"	% to close at each level
InpEnableMaxHoldingTime	false	Enable position time limits
InpMaxHoldingHours	14	Maximum holding time (hours) (1,1,240)
InpCloseProfitableOnly	true	Close only profitable positions
InpMinProfitThreshold	0.0	Profit threshold (points) (0.0,1.0,500.0)
InpEnableMomentumExit	false	Exit on momentum loss
InpMomTimeframe	7	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
InpMomRsiPeriod	124	RSI period for momentum exit (5,1,30)
InpMomRsiOverbought	70.0	RSI exit for buys (60.0,1.0,100.0)
InpMomRsiOversold	40.0	RSI exit for sells (0.0,1.0,40.0)
InpMomAdxPeriod	14	ADX period for exit (7,1,30)
InpMomAdxWeakThreshold	0.0	Exit when ADX drops below (5.0,1.0,40.0)
InpEnableVolatilityExit	false	Exit on ATR spike
InpVolExitAtrTimeframe	0	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1)
InpVolExitAtrPeriod	79	ATR period (5,1,50)
InpVolExitAtrAvgPeriod	25	ATR average period (10,1,200)
InpVolSpikeMultiplier	1.8	ATR spike threshold vs avg (1.0,0.1,10.0)
InpVolExitProfitOnly	true	Require profit before ATR spike exit
InpEnableSRExit	false	Exit at key levels
InpSRLookbackBars	50	Bars to find swing points (5,1,500)
InpSRDistancePoints	20.0	Distance to trigger exit (1.0,1.0,1000.0)
InpSRExitProfitOnly	false	Only if profitable
InpEnableCCIExit	true	Enable CCI exhaustion exit
InpCCITimeframe	5	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // CCI timeframe
InpCCIPeriod	28	CCI period (10,1,50)
InpCCIPrice	1	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // CCI applied price
InpCCIOverbought	345.0	Overbought level (100.0,10.0,300.0)
InpCCIOversold	-585.0	Oversold level (-300.0,10.0,-100.0)
InpCCIUseDivergence	true	Detect divergence
InpCCIDivergenceBars	32	Divergence lookback bars (3,1,20)
InpCCICloseProfit	true	Close profitable positions
InpCCICloseLoss	false	Close losing positions too
InpCCIMinProfitPoints	51.0	Min profit to close (0.0,1.0,100.0)
InpEnableMACDSlopeExit	false	Enable MACD slope exit
InpMACDTimeframe	0	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // MACD timeframe
InpMACDFastEMA	12	Fast EMA (5,1,50)
InpMACDSlowEMA	26	Slow EMA (10,1,100)
InpMACDSignal	9	Signal line (5,1,20)
g_InpMacdPrice	1	Applied price (1=close,2=open,3=high,4=low,5=median,6=typical,7=weighted) // MACD applied price
InpMACDWatchHistogram	true	Monitor histogram slope
InpMACDSlopeBars	2	Bars for slope calculation (1,1,5)
InpMACDWaitZeroCross	false	Wait for zero line cross
InpMACDCloseProfit	true	Close profitable positions
InpMACDCloseLoss	false	Close losing positions too
InpMACDMinProfitPoints	5.0	Min profit to close (0.0,1.0,100.0)
InpMACDMinSlopeThreshold	0.0001	Min histogram change (0.0,0.00001,0.001)
InpEnableSwingExit	false	Enable swing reversal exit
InpSwingLeftBars	3	Left bars for swing (2,1,10)
InpSwingRightBars	2	Right bars for swing (1,1,10)
InpSwingMinSize	20.0	Min swing size points (5.0,1.0,100.0)
InpSwingPartialClose	true	Close half positions first
InpSwingCloseProfit	true	Close profitable positions
InpSwingCloseLoss	false	Close losing positions too
InpSwingMinProfitPoints	15.0	Min profit to close (0.0,1.0,100.0)
InpSwingMaxAge	3	Max bars ago for swing (1,1,10)
InpEnableStochExit	true	Enable stochastic exit
InpStochTimeframe	5	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Stochastic timeframe
InpStochKPeriod	47	%K period (5,1,50)
InpStochDPeriod	27	%D period (2,1,20)
InpStochSlowing	23	Slowing (1,1,10)
InpStochOverbought	512.0	Overbought (70.0,5.0,100.0)
InpStochOversold	110.0	Oversold (0.0,5.0,30.0)
InpStochWaitCross	true	Wait for %K/%D crossover
InpStochCloseProfit	false	Close profitable positions
InpStochCloseLoss	true	Close losing positions too
InpStochMinProfitPoints	26.0	Min profit to close (0.0,1.0,100.0)
InpEnableROCExit	false	Enable ROC momentum exit
InpROCTimeframe	0	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // ROC timeframe
InpROCPeriod	12	ROC lookback period (5,1,50)
InpROCThreshold	0.5	Min ROC to stay in (0.0,0.1,5.0)
InpROCWeakBars	2	Consecutive weak bars (1,1,5)
InpROCCloseNewest	false	Close newest positions first
InpROCCloseProfit	true	Close profitable positions
InpROCCloseLoss	false	Close losing positions too
InpROCMinProfitPoints	0.0	Min profit to close (0.0,1.0,100.0)
InpEnableMTFExit	false	Enable MTF trend exit
InpMTFTimeframe	8	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // Higher timeframe to monitor
InpMTFMAPeriod	50	MA period for trend (20,1,200)
InpMTFMAMethod	MODE_EMA	MA method
InpMTFCloseOnCross	true	Close when price crosses MA
InpMTFPartialExit	true	Close oldest 50% first
InpMTFCloseProfit	true	Close profitable positions
InpMTFCloseLoss	false	Close losing positions too
InpMTFMinProfitPoints	20.0	Min profit to close (0.0,1.0,100.0)
InpEnableSARExit	false	Enable SAR flip exit
InpSARTimeframe	0	Timeframe (1=M1,2=M5,3=M15,4=M30,5=H1,6=H4,7=D1) // SAR timeframe
InpSARStep	0.02	SAR step (0.01,0.001,0.1)
InpSARMaximum	0.2	SAR maximum (0.1,0.01,0.5)
InpSARCloseAll	true	Close all positions on flip
InpSARCloseProfit	true	Close profitable positions
InpSARCloseLoss	false	Close losing positions too
InpSARMinProfitPoints	0.0	Min profit to close (0.0,1.0,100.0)
InpExitSectionHeaderEND	"=== END OF EXIT STRATEGIES ==="	Section header for inputs
InputDashboardSectionHeader	"=== DASHBOARD AND Visualization ==="	Section header for inputs
InpShowDashboard	false	Display on-chart dashboard
InpDashboardX	8	Dashboard X position (pixels)
InpDashboardY	28	Dashboard Y position (pixels)
InpDashboardWidth	360	Dashboard width (pixels)
InpDashboardBgColor	(color)525572	Dashboard background color
InpDashboardBgOpacity	245	Dashboard fill opacity (0 transparent, 255 solid) (0,1,255)
InpDashboardTextColor	(color)16777215	Dashboard text color
InpDashboardAccentColor	(color)16748574	Dashboard header/accent color
InpAttachHullIndicators	false	Show Hull indicator overlays on chart
InpHullIndicatorSubwindow	1	Subwindow index for Hull overlays (0=main chart, 1+=subwindows)
InpShowRsiIndicator	false	Display RSI indicator visualization
InpRsiIndicatorSubwindow	2	Subwindow index for RSI visualization (1+=subwindows)
InpShowAdxIndicator	false	Display ADX indicator visualization
InpAdxIndicatorSubwindow	3	Subwindow index for ADX visualization (1+=subwindows)
InpShowAtrIndicator	false	Display ATR indicator visualization
InpAtrIndicatorSubwindow	4	Subwindow index for ATR visualization (1+=subwindows)

Source Code (.mq5)Open Source

Pipsgrowth_com_EX16104.mq5

#property copyright "Pipsgrowth.com"
#property link      "https://pipsgrowth.com"
#property version   "2.00"
#property strict
#property description "Pipsgrowth.com EX16104 Hull2EA — four Hull V7 indicator trend EA with advanced exits, full 12-layer stack."

#include <Trade/Trade.mqh>
#include <Trade/PositionInfo.mqh>

//+------------------------------------------------------------------+
//| Internal Hull V7 Calculator Class                                |
//+------------------------------------------------------------------+
class CHullV7Calculator
{
private:
   string             m_symbol;
   ENUM_TIMEFRAMES    m_timeframe;
   int                m_period;
   double             m_divisor;
   ENUM_APPLIED_PRICE m_price;
   double             m_flatSensitivity;
   int                m_flatBars;
   bool               m_useAdx;
   int                m_adxHandle;
   double             m_adxThreshold;
   
   double CalculateWMA(const double &price[], int n, int shift)
   {
      if(n <= 0) return 0.0;
      double sum = 0.0;
      double weightSum = 0.0;
      int size = ArraySize(price);
      
      for(int i = 0; i < n; i++)
      {
         int idx = shift + i;
         if(idx >= size) break;
         
         double w = (double)(n - i);
         sum += price[idx] * w;
         weightSum += w;
      }
      return (weightSum > 0.0) ? sum / weightSum : 0.0;
   }

public:
   CHullV7Calculator() : m_adxHandle(INVALID_HANDLE) {}
   ~CHullV7Calculator() 
   { 
      if(m_adxHandle != INVALID_HANDLE) 
         IndicatorRelease(m_adxHandle); 
   }

   bool Init(string symbol, int period, double divisor, ENUM_APPLIED_PRICE price,
             ENUM_TIMEFRAMES timeframe, double flatSensitivity, int flatBars,
             bool useAdx, ENUM_TIMEFRAMES adxTf, int adxPer, double adxThresh)
   {
      m_symbol = symbol;
      m_period = period;
      m_divisor = divisor;

Full source code available on download

Educational purposes only. Do NOT use with real money. Test on demo accounts only.

Tags:ex16104trendpipsgrowthfreemt5xauusd

Clear Warning: Educational Purposes Only

Clear Warning: This Expert Advisor is for educational and testing purposes only. Do NOT use it with real money. Test only on demo accounts. Trading with real money involves substantial risk of capital loss. This does not constitute investment advice.